LOADING

系所簡介

歷屆系主任

徐業良 arrow_outward

徐業良教授(1999--2005)

學歷

National Taiwan University, Mechanical Engineering, BS, 1981/09 - 1985/06
Stanford University, Mechanical Engineering, Design Division, MS, 1987/09 - 1988/06
Stanford University, Mechanical Engineering, Design Division, PhD, 1989/07 - 1992/06

經歷

Academic Experience
Editor-in-Chief, Gerontechnology (official journal of International Society for Gerontechnology), 2016/09 - present
IT Director, International Society for Gerontechnology, 2014/06 - present
President, International Society of Gerontechnology, Sinophone Chapter, 2014/06 - present
Editor-in-Chief, Journal of Gerontechnology and Service Management (in Chinese), 2012/12 - present
Co-Director, Italian Design Summer School, University of Bologna, 2010/02 - present
Director, Gerontechnology Research Center, Yuan Ze University, 2003/01 - present
Professor, Department of Mechanical Engineering, Yuan Ze University, 2001/02 - present
President, Chinese Society of Gerontechnology and Service Management, 2013/01 - 2016/12
Vice President, International Society for Gerontechnology, 2014/06 - 2016/09
Associate Editor, Gerontechnology (official journal of International Society for Gerontechnology), 2011/08 - 2016/09
Chair, the 9th World Conference of Gerontechnology, 2014/06
Executive Board, International Society of Gerontechnology, 2012/06 - 2014/06
Dean of Academic Affairs, Yuan Ze University, 2011/08 - 2012/07
Secretary General, Chinese Society of Gerontechnology and Service Management, 2010/01 - 2012/12
Secretary General, Yuan Ze University, 2005/08 - 2011/07
Member of the Presidential Search Committee of Yuan Ze University, 2005
Director, Office of Physical Education, Yuan Ze University, 2002/08 - 2005/07
Chairman, Department of Resource and Environment Science Technology, Yuan Ze University, 2002/08 - 2005/07
Chairman, Department of Mechanical Engineering, Yuan Ze University, 1999/08 - 2005/07
Dean, Office of Information Services, Yuan Ze University, 1997/08 - 1999/07
Associate Dean, Office of Information Services, and Head Librarian, Yuan Ze University, 1996/08 - 1997/07
Director, Center of Teaching and Learning, Office of Academic Affairs, Yuan Ze University, 1995/08 - 1996/07
Chief, Curriculum Section, Office of Academic Affairs, Yuan Ze University, 1994/08 - 1995/07
Chief, International Cooperation Section, Office of Research and Development, Yuan Ze University, 1993/10 - 1994/07
Associate Professor, Department of Mechanical Engineering, Yuan Ze University, 1992/08 - 2001/02

Industrial Experience
CEO, Seda G-Tech Co., Ltd, 2016/04 - present
Director（董事）, Y. Z. Hsu Medical Foundation 2014/07 – 2018/06
Columnist, Car Magazine（汽車購買指南）, 1995/06-2017/07
Inspector（監察人）, Smart Care Inc., 2009/09-2011/11
Director（董事）, TacBright Optronics Co., 2010/09-2011/07
Director（董事）, Asia Cement Co., Ltd., 2002/06-2005/06

研究專長

Innovative product design, Gerontechnology

期刊論文

  1. 白麗, 鄭家凱, 林恩如, 陳思宇, 張譯云, 徐業良, 華碩電腦智慧機器人產品企劃團隊 (2018). 陪伴型機器人使用者經驗評估─ 以智慧居家機器人 Zenbo 為例. 福祉科技與服務管理學刊, 6(3), 265-282. PDF

  2. 徐業良, & 白麗 (2018). 智慧科技於高齡者生活與照護應用之前瞻發展建議. 福祉科技與服務管理學刊, 6(3), 325-338. PDF

  3. 徐業良, & 白麗 (2018). Gerontechnology-老人福祉科技的機會和挑戰. 福祉科技與服務管理學刊, 6(1), 89-104. PDF

  4. 徐業良, & 白麗 (2018). 充分應用智慧科技面對高齡社會挑戰. 福祉科技與服務管理學刊, 6(1), 75-80. PDF

  5. Hsu, Y. L. (2016). A Chinese response to the aging society. Gerontechnology, 14(4), 187-190. PDF

  6. Hsu, Y. L. (2015). Smart Technology for the Older Adults to Facilitate Independent Living and Social Participation. International Journal of Automation and Smart Technology, 5 (4), 195-196. PDF

  7. Lu, J. M., & Hsu, Y. L. (2015). The use of psychophysiological methods in the evaluation of mental commitment robots for elderly care. Journal of Industrial and Production Engineering, 32(7), 449-456. PDF

  8. Liu, Y. W., Hsu, Y. L., & Chang, W. Y. (2015). Development of a bed-centered telehealth system based on a motion-sensing mattress. Journal of Clinical Gerontology and Geriatrics, 6(1), 1-8. PDF

  9. Hsu, Y. L., Jiang, Y. F., Lin, C. H., Lai, T. Y., & Chang, C. L. (2015). Analysis of Personal Life Patterns Using Accelerometer-Based Wearable Devices. International Journal of Automation and Smart Technology, 5(4), 243-248. PDF

  10. 徐業良, & 黃于珍 (2014). 善用資通訊科技協助高齡者照護－從遠距居家照護到溝通與關懷. 公共治理季刊, 2(2), 58-68. PDF

  11. 徐業良 (2014). 海峽兩岸應對老齡社會之研究共識論壇. 福祉科技與服務管理學刊, 2(2). PDF

  12. 徐業良 (2014). 第九屆國際老人福祉科技學會世界年會在台灣. 福祉科技與服務管理學刊, 2(1). PDF

  13. 徐業良 (2014). 老人福祉科技產業的機會和挑戰. 福祉科技與服務管理學刊, 2(1). PDF

  14. Su, R. H., Hsu, Y. L., Chan, L., Lin, H., & Yang, C. C. (2014). Assessing abnormal gaits of Parkinson’s disease patients using a wearable motion detector. Biomedical Engineering: Applications, Basis and Communications, 26(2). PDF

  15. Lin, H., Hsu, Y. L., Hsu, M. S., & Cheng, C. M. (2014). Development of a telehealthcare decision support system for patients discharged from hospital. Telemedicine and e-Health, 20(8), 748-756. PDF

  16. Lin, H., Hsu, Y. L., Hsu, M. S., & Cheng, C. M. (2013). Development and practice of a Telehealthcare Expert System - TES. Telemedicine and e-Health,19(7), 549-556. PDF

  17. Chen, Y. S., Hsu, Y. L., & Lu, J. M. (2013). TRiCmini – telepresence robot for interpersonal communication for older adults. Journal of the Chinese Society of Mechanical Engineers, 34(2), 121-127. PDF

  18. 黃于珍, & 徐業良 (2013). 以社群網路為基礎建構個人化遠距居家照護系統. 福祉科技與服務管理學刊, 1(2), 72-81. PDF

  19. Hsu, P. E., Hsu, Y. L, Lu, J. M., & Chang, C. H. (2013). Seat adjustment design of the intelligent robotic wheelchair based on the Stewart platform. International Journal of Advanced Robotic Systems, 10, 168. PDF

  20. Hsu, P. E., Hsu, Y. L, Chang, K. W., & Geiser, C. (2012). Mobility assistance design of the intelligent robotic wheelchair. International Journal of Advanced Robotic Systems, 9, 244. PDF

  21. Huang, Y. C., Lin, H. J., Hsu, Y. L., & Lin, J. L. (2012). Using n-gram analysis to cluster heartbeat signals. BMC Medical Informatics and Decision Making, 12, 64. PDF

  22. Yang, C. C., & Hsu, Y. L. (2012). Remote monitoring and assessment of daily activities in the home environment . Journal of Clinical Gerontology and Geriatrics, 3(2), 97-104. PDF

  23. 許博爾, 徐業良, 張程皓, 翁啟軒, & 曾吉宏 (2012). 四軸史都華平台應用於輪椅座椅多自由度調整機構設計. 福祉科技與服務管理學刊, 1(1), 125-132. PDF

  24. Hsu, Y. L. (2012). Implementing peer evaluation to improve students’ participation in oral presentations in a large mechanical design class. Global Journal of Engineering Education, 14(3), 219-224. PDF

  25. Yang, C. C., Hsu, Y. L., Shih, K. S., & Lu, J. M. (2011). Real-time gait cycle parameters recognition using a wearable accelerometry system. Sensors,11(8), 7314-7326. PDF

  26. Yang, C. C., & Hsu, Y. L. (2010). A review of accelerometry-based wearable motion detectors for physical activity Monitoring. Sensors, 10(8), 7772-7778. PDF

  27. Yang, C. C, & Hsu, Y. L. (2009). Development of a rapid prototyping system for custom contoured foam cushion Using the Pressure Mapping Method. Biomedical Engineering, Applications, Basis, and Communications, 21(1), 9-16. PDF

  28. Yang, C. C, & Hsu, Y. L. (2009). Development of a wearable motion detector for tele-monitoring and real-time identification of physical activity. Telemedicine and e-Health, 15(1), 1035-1045. PDF

  29. Hsu, Y. L., Yu, C. C., Wang, Y. T., & Hsu, M. H. (2009). Uniform luminance design of the direct-type backlight unit of liquid crystal displays. Journal of the Chinese Institute of Engineers, 32(5), 717-725. PDF

  30. 徐業良, 許博爾, & 洪永杰 (2009). 結合專利資訊與公理設計之創新設計流程. 品質學報, 16(3), 153-163. PDF

  31. Cheng, C. M., Hsu, Y. L., & Young, C. M. (2008). Development of a portable device for tele-monitoring of physical activities during sleep. Telemedicine and e-Health, 14(10), 1044-1056. PDF

  32. Cheng, C. M., Hsu, Y. L., Young, C. M., & Wu, C. H (2008). Development of a portable device for tele-monitoring of snoring and OSAS symptoms. Telemedicine and e-Health, 14(1), 55-68. PDF

  33. Tsai, T. C., Hsu, Y. L., Ma, A. I., King, T., & Wu, C. H. (2007). Developing a telepresence robot for interpersonal communication with the elderly in a home environment. Telemedicine and e-Health, 13(4), 407-424. PDF

  34. Hsu, Y. L., Yang, C. C., Tsai, T. C., Cheng, C. M., & Wu, C. H. (2007). Development of a decentralized home telehealth monitoring system. Telemedicine and e-Health, 13(1), 69-78. PDF

  35. Hsu, Y. L., & Liu, T. C. (2007). Developing a fuzzy proportional-derivative controller optimization engine for engineering design optimization problems. Engineering Optimization, 39(6), 679-700. PDF

  36. Hsu, Y. L., Yu, C. C., Wu, S. C., & Hsu, M. H. (2007). Developing an automated design modification system for aluminum disk wheels. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 221(3), 447-456. PDF

  37. Tsai, T. C., & Hsu, Y. L. (2007). Development of a parallel surgical robot with automatic bone drilling cariage for sterotactic neurosurgery. Biomedical Engineering, Applications, Basis, and Communications, 19(4), 269-277. PDF

  38. Hung, Y. C., & Hsu, Y. L. (2007). An integrated process for designing around existing patents through TRIZ. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 221(1), 109-122. PDF

  39. Hsu, Y. L., & Yu, C. C. (2006). Computer simulation of casting process of aluminum wheels. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 220(2), 203-211. PDF

  40. Hsu, Y. L., Hung, Y. C., & Yin, J. Z. (2006). Design of a novel total knee prosthesis using TRIZ. Journal of Medical and Biological Engineering, 26(4), 177-185. PDF

  41. 鄭智銘, 張琳, 馬鴻祥, 徐業良 & 吳昌暉 (2006). 分散式儲存架構下的遠距環境監測系統之建構：以故宮博物院外展環境監測為例. 博物館學季刊, 20(2), 97-107. PDF

  42. Hsu, Y. L., Liu, T. C., & Liu, Tso-Lung (2005). A fuzzy proportional derivative controller for engineering optimization problems using optimality criteria approach. Engineering Optimization, 37(6), 649-661. PDF

  43. Hsu, M. H., & Hsu, Y. L. (2005). Interpreting three-dimensional structural topology optimization result. Computers and Structures, 83(4-5), 327-337. PDF

  44. Wang, S. G., & Hsu, Y. L. (2005). One-pass milling machining parameter optimization to achieve mirror surface roughness. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 219(1), 177-181. PDF

  45. Hsu, Y. L., Chen, M. C., Cheng, C. M., & Wu, C. H. (2005). Development of a portable device for home monitoring of snoring. Journal of Biomedical Engineering - Applications, Basis & Communications, 17(4), 176-180. PDF

  46. Hsu, M. H., & Hsu, Y. L. (2005). Generalization of two- and three-dimensional structural topology optimization. Engineering Optimization, 37(1), 83-102. PDF

  47. Hsu Y. L., Liu T. C., Thibault F., & Lanctot B. (2004). Design optimization of the blow moulding process using fuzzy optimization algorithm. Proceedings of the I MECH E Part B Journal of Engineering Manufacture, 218(2), 197-212. PDF

  48. Hsu, Y. L., Huang, C. C., Yo, C. Y., Chen, C. J., & Lien, C. M. (2004). Comfort evaluation of hearing protection. International Journal of Industrial Ergonomics, 33(6), 543-551. PDF

  49. Tsai, C. C., & Hsu, Y. L. (2004). Development of a telepresence agent. Asian Journal of Information Technology, 3(1), 27-34. PDF

  50. Hsu, Y. L., Hsu, M. H., Wang, S. G., & Liu, T. C. (2004). Prediction of fatigue failures of aluminum disc wheels using the failure probability contour based on historical test data. Journal of the Chinese Institute of Industrial Engineers, 2(6), 551-558. PDF

  51. Hsu, Y. L., Wang, S. G., & Yu, C. C. (2003). A sequential approximation method using neural networks for engineering design optimization problems. Engineering Optimization, 35(5), 489-511. PDF

  52. Hsu, Y. L., Wang, C. F., Lien, C. M., & Kao, C. Y. (2003). Design and comfort evaluation of a novel locomotion device for training overhead traveling crane operators in a virtual environment. Journal of the Chinese Institute of the Industrial Engineers, 20(1), 62-70. PDF

  53. Hsu, Y. L., & Yo, C. Y. (2003). The problem-solving approach for the fundamental hands-on practice courses in mechanical engineering education. Journal of Chinese Society of Mechanical Engineers, 24(5), 517-524. PDF

  54. Hsu, Y. L., Hsu, Y. C., & Hsu, M. H. (2002). Shape optimal design of contact springs of electronic connectors. Transactions of the ASME, Journal of Electronic Packaging, 124(3), 178-183. PDF

  55. Hsu, Y. L, & Wang, S. G (2002). Minimizing angular backlash of a multi-stage gear train. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(4), 565-569. PDF

  56. Hsu, Y. L., Lee, S. T., & Lin, H. W. (2001). A modular mechatronic system for automatic bone drilling. Biomedical Engineering, Applications, Basis, and Communications, 13(4), 168-174. PDF

  57. Hsu, Y. L., Lee, S. T., & Lin, H. W. (2001). Development of a parallel surgical robot with automatic bone drilling carriage for stereotactic neurosurgery. Biomedical Engineering, Applications, Basis, and Communications, 13(4), 168-174. PDF

  58. Hsu, Y. L., Dong, Y. H., & Hsu, M. H. (2001). A sequential approximation method using neural networks for nonlinear discrete variable optimization with implicit constraints. JSME International Journal, Series C, 44(1), 103-112. PDF

  59. Hsu, Y. L, & Hsu, M. H. (2001). Weight reduction of aluminum disc wheels under fatigue constraints. Computers in Industry, 46(2), 61-73. PDF

  60. Hsu, Y. L., Hsu, M. H., & Chen, C. T. (2001). Interpreting results from topology optimization using density contours. Computers & Structures, 79(10), 1049-1057. PDF

  61. Hsu, Y. L., Tai, C. Y., & Chen, T. C. (2000). Improving thermal properties of industrial safety helmets. International Journal of Industrial Ergonomics,26(1), 109-117. PDF

  62. Hsu, Y. L. (2000). A design process model based on product states. Journal of the Chinese Society of Mechanical Engineers, 21(4), 369-377. PDF

  63. Hsu, Y. L. (1998). Teaching mechanical design to a large class: a report from Taiwan. Journal of Engineering Education, 87(1), 47-51. PDF

  64. Hsu, Y. L., & Wilde, D. J. (1997). Notes on Monotonicity Principles. Transactions of the ASME, Journal of Mechanical Design, 119(2), 153-332. PDF

  65. Hsu, Y. L., Sheppard, S. D., & Wilde, D. J. (1996). The explicit approximation method for design optimization with implicit constraints. Engineering Optimization, 27(1), 21-42. PDF

  66. Chu. P. Y., Hsu, Y. L., & Fehling, M. (1996). A decision support system for project portfolio ion. Computers in Industry, 32(2), 141-149. PDF

  67. Lee, H. J., Lin, M. C., Hsu, Y. L., & Soon, K. K. (1996). Optimal shape design of engine connecting rod with special lumping mass constraint. JSME International Journal, Series C, 39(3), 597-605. PDF

  68. Hsu, Y. L., Guo, Y. S., & Sun, T. L. (1996). Skeleton curvature function method for two dimensional shape optimization under stress constraints. Journal of the Chinese Society of Mechanical Engineers, 17(4), 405-411. PDF

  69. Hsu, Y. L., Sheppard, S. D., & Wilde, D. J. (1995). The curvature function method for two-dimensional shape optimization under stress constraints. Computers and Structures, 55(4), 647-657. PDF

  70. Hsu, Y. L. (1994). A review of structural shape optimization. Computers in Industry, 25(1), 3-13. PDF

  71. Hsu, Y. L., Steele, C. R., & Sheppard, S. D. (1994). Fully stressed thickness profile design at discontinuities of axisymmetric shells. Structural Optimization, 7(3), 119-205. PDF

  72. Hsu, Y. L. (1994). The curvature function method for optimal thickness profile design at discontinuities of axisymmetric shells. The Chinese Journal of Mechanics, 10(1), 11-19. PDF


得獎或研究成果

arrow_upward