教學團隊

1990 Ph.D. Northwestern University, Illinois

1986 M.S. Northwestern University, Illinois

1986 B.S. Chung Yuan Christian University

經歷：
元智大學副校長（2022.2迄今）
元智大學代理校長（2015.8-2016.1）
元智大學主任秘書/人事室主任（2013.8-2015.7）
亞東技術學院校長（2005.10-2012.7）
元智大學研發長（2005.8-2005.10）
元智大學主任秘書（2002.8-2005.7）
國科會國際合作處處長（1999.3-2001.1）
元智大學機械工程學系教授（1996.8迄今）
元智大學學務長（1995.8-1999.2）
元智大學通識教學部副主任（1994.8-1995.7）
元智大學學生事務處課外活動組主任（1992.8-1994.7）
元智大學機械工程學系副教授（1991.2-1996.7）

學術服務：
大學自辦品保機制審查工作小組審查委員（2020）
教育部專科以上學校學生受教權益查核委員（2020）
教育部新南向人才培育推動計畫查核委員（2019-2020）
大學校院校務評鑑委員（2011, 2017-2018）
科技部能源國家型科技計畫國際合作審查委員（2015-2016）
大學校院校務評鑑追蹤評鑑與再評鑑委員（2011）
國科會機械固力學門計畫複審委員（2001）
經濟部科技專案審查委員（2001）

尖端材料與應用力學、磨潤學

1. Tze-Chi Hsu, Jing-Hong Chen, Tsu-Liang Chou, & Hsin-Lu Chiang (2015). “Surface roughness and magnetic effect of magnetized finite journal bearings lubricated with ferrofluid”, Key Engineering Materials, Vol. 642, pp.242-247.

2. Tze-Chi Hsu, Jing-Hong Chen, Hsin-Lu Chiang, & Tsu-Liang Chou (2014).  “Combined effects of magnetic field and surface roughness on long journal bearing lubricated with ferrofluid” , Journal of Marine Science and Technology, Vol. 22, N0.2, pp.154-162.

3. Tze-Chi Hsu, Jing-Hong Chen, Hsin-Lu Chiang, & Tsu-Liang Chou (2013).  “Lubrication performance of short journal bearings considering effects of magnetic fluid and surface roughness”, Tribology International, Vol.61, pp. 169-175.

4. Wang, Ming-Wen, Hsu Tze-Chi, & Zheng Jie-Ren (2009). “Sintering Process and Mechanical Property of MWCNTs/HDPE Bulk Composite”, Polymer-Plastics Technology and Engineering, Vol.48, No.8, pp.821-826.

5. M.W. Wang, T.C. Hsu, & C.H. Weng (2008). “Alignment of MWCNTs in polymercomposites by dielectrophoresis”, The European Physical Journal Applied Physics Vol. 42, pp.241-246.

6. Chun-Yuan Lin, Jui-Pin Hung, & Tze-Chi Hsu (2008). “Failure Analysis of Reverse Shaft in the Transmission System of All-Terrain Vehicles” Journal of Failure Analysis and Prevention, Vol.8, No.1, pp.75-80.

7. 黃正熙、徐澤志、林韋良(2008)。“硬鍍膜端銑刀之磨耗研究”, 黎明學報, Vol.20, No.1(B), pp.169-174.

8. 黃正熙、徐澤志、王斯皇(2008)。“超高分子量聚乙烯之奈米刮痕模型研究”, 黎明學報, Vol.20, No.1(B), pp.169-174.

9. Tze-Chi Hsu, Hsiu-Lu Chiang, & Chun-Yuan Lin (2007). “Effect of molecular rarefaction on head/tape interface in a linear tape drive”, Industrial Lubrication and Tribology, Vol.59, Iss:3, pp.107-118.

10. Tze-Chi Hsu, Hsiu-Lu Chiang, & Chun-Yuan Lin (2006). “Application of modified Reynolds equation for gas lubrication on air bearing analysis”, Industrial Lubrication and Tribology, Vol. 58, Iss: 5, pp.269-275.

11. T. C. Hsu, S. C. Tzeng, A. H. Tan, & C. S. Wei (2005). “A Novel Laser Bump Design for Low Glide /Low Stiction Disk”, Microsystem Technologies Vol.11, No.7, pp.515-518.

12. 徐澤志、江新祿、林俊源 (2005)。“旋轉磁頭/磁帶界面間之分子稀薄效應分析” 科技學刊Vol.14, No.73, pp.197-203.

13. Tze-Chi Hsu & Chien-Chin Huang (2003). “The friction modeling of different tribological interfaces in extrusion process” Materials Processing Technology, Vol.140, pp.49-53.

14. T.C. Hsu & Bo-Gy Chang (2002). “A Mixed Lubricant Model for computer Simulation of Cold Rolling Processes”, Journal of Manufacturing Science and Engineering, V0l. 43, pp.156-161.

15. 徐澤志、黃建智(2002)。“擠製過程於雙重界面下之摩擦係數求取與驗證”, 鍛造, Vol.11, No.2, pp.9-18.

16. Tze-Chi Hsu, Hung-Mo Wu, & Ching-Hua Hung (2001). “The Computer Simulation of Lubricated Cold Rolling Processes”, Tribology Transactions Vol.44, Iss:2, pp.191-196.

17. Tung-Sheng Yang & Tze-Chi Hsu (2001). “Forming limit analysis of hemispherical-punch stretch forming”, Materials Processing Technology, Vol.117, pp.32–36.

18. T.-C. Hsu & T.-S. Yang (2001). “The Computer Simulation of Tribological Influence on Strain Path and Forming Limit in Punch Stretching of Sheet Metal”, Advanced Manufacturing Technology Vol.17, No.6, pp.393-399.

19. T.C. Hsu & Yuan-Mo Li (2000). “A Mixed Lubricant Model for computer Simulation of Cold Rolling Processes”, ASME, Tribology Transactions, Vol.43, pp. 781-787.

20. Tze-Chi Hsu & Chi-Chia Liu (1998). “Internal Variables Effects in Punch Friction Characterization” ASME Journal of Tribology Vol.120, pp.510-516.

21. Tze-Chi Hsu & Chung-Hung Lee (1997). “Refined Friction Modeling for Simple Upsetting”, Journal of Manufacturing Science and Engineering, Vol.119, pp.563-570.

22. Tze-Chi Hsu & Chung-Hung Lee (1997). “Realistic Friction Modeling for Simple Upsetting”, ASME, Journal of Society of Tribologists and Lubrication”, Vol.40, No.2, pp.367-373.

23. Tze-Chi Hsu & Ing-Ren Shien (1997). “Finite Element Modeling of Sheet Metal Forming Process with Bending Effects”, Materials Processing Technology, Vol.63, pp.733–737.

24. Tze-Chi Hsu & Shian-Jiann Hsieh (1996). “Theoretical and Experimental Analysis of Failure and Experiments of the Hemisphere Punch Hydroforming Processes” Manufacturing Science and Engineering, Vol.118, pp.434-438.

25. Tze-Chi Hsu & Chan-Hung Chu (1995). “A finite-element analysis of sheet metal forming processes” Materials Processing Technology, Vol.54, pp.70-75.

26. 邵清安、徐澤志、蔡坤鋒(1995)。“光散射斑點法應用於冷軋鋼板表面粗糙度之量測模式” 檢測科技Vol.13, No.5, pp.289-301.

27. W.R.D. Wilson, T.C. Hsu, & X.B. Huang (1995). “A Realistic Friction Model for Computer Simulation of Sheet Metal Forming Processes”, ASME J. of Eng. for Ind. Vol. 117, pp. 202-209.

28. T.C. Hsu (1994). “The friction modeling of computer simulation in sheet metal forming processes”, The Chinese Journal of Mechanics, Vol. 10, No. 3, pp.179-189.

29. Tze-Chi Hsu & Shang-Guey Kuo (1994). “Boundary friction model in punch friction test”, Materials Processing Technology, Vol.45, pp.601-606.

30. Tze-Chi Hsu & William R. D. Wilson (1994). “Refined Models for Hydrodynamic Lubrication in Axisymmetric Stretch Forming”, Tribology, Vol.116, Iss:1, pp.101-109.

31. Tze-Chi Hsu (1993). “The "internal-variables" approach in friction modeling of computer simulation in sheet-metal forming processes”, Materials Processing Technology, Vol.37, pp.95-114.

32. Sy-wei Lo, Tze-Chi Hsu, & W.R.D. Wilson (1993). “An analysis of the hemispherical-punch hydroforming processes” Materials Processing Technology, Vol.37, pp.225–239.

33. Tze-Chi Hsu (1993). “Hydrodynamic Lubrication in Sheet Metal Forming Processes”, The Chinese Society of Mechanical Engineers, Vol.14, No.3, pp. 289-298.

34. Rudnicki, J. W., & T. C. Hsu (1988). “Pore Pressure Changes Induced by Slip on Permeable and Impermeable Faults”, Geophysical Research, Vol.93, No.B4, pp. 3275-3285.

▪ Outstanding Award of Education, Geneva International Exhibition of Inventions (2011)
▪ YZU Award of Excellence in Research (2004)
▪ Distinguished Alumni of the Dept. of Civil Engineering, Chung Yuan Christian University (2003)
▪ Research Award, National Science Council (1994, 1995, 1996, 1997, 1998)
▪ YZU Award in Research (1998)
▪ ASME Black All and Gauge Award (1996)