成員

柯坤呈 助理教授

  • 學歷
    國立臺灣大學機械工程學博士
    經歷
    2021.08 - present
    元智大學機械工程學系 助理教授

    2019.07 ~ 2021.07
    國立高雄科技大學 博士後研究員

    2020.08 ~ 2021.07
    科盛科技 兼任專案研發經理

    2018.10 ~ 2019.06
    澳洲商安科自動化股份有限公司 應用工程師
    研究專長
    智慧製造、人工智慧、射出成型、電腦輔助工程、機械視覺、機械製造
    得獎或研究成果
    1. Two Best Poster Award, 34th International Conference of Polymer Processing Society 2018 (PPS-34), Taipei city, Taiwan.
    2. 第十二屆SPE-Taiwan塑膠材料應用與技術論文比賽-第三名
    3. 第十二屆SPE-Taiwan塑膠材料應用與技術論文比賽-佳作
    4. 第十一屆SPE-Taiwan塑膠材料應用與技術論文比賽-第二名
    5. 第十一屆SPE-Taiwan塑膠材料應用與技術論文比賽-佳作
    6. 第十一屆SPE-Taiwan塑膠材料應用與技術論文比賽-第一名
    7. 2017模具暨應用產業技術論文獎-傑出獎
    1. M.-S. Huang*, C.-Y. Liu, K.-C. Ke, Calibration of cavity pressure simulation using autoencoder and multilayer perceptron neural networks, Polymer Engineering & Science, 1(2021)11, IF = 2.428.
    2. K.-C. Ke, M.-S. Huang*, Quality Classification of Injection-Molded Components by Using Quality Indices, Grading, and Machine Learning, Polymers. 13 (2021) 353. IF = 4.329
    3. M.-S. Huang*, K.-C. Ke, C.-Y. Liu, Cavity Pressure-based Holding Pressure Adjustment for Enhancing the Consistency of Injection Molding Quality, Journal of Applied Polymer Science, In Press. IF = 2.52
    4. K.-C. Ke, M.-S. Huang*, Quality Prediction for Injection Molding by Using a Multilayer Perceptron Neural Network, Polymers. 12 (2020) 1812. IF = 4.329
    5. C.-C. Kao, K.-C. Ke, W.-C. Hung, S.-Y. Yang*, Hot embossing of microstructure with moving induction heating and gas-assisted pressuring, Microsyst. Technol. 26 (2020) 957–967. IF = 1.61
    6. K.-C. Ke, L.-J. Lin, S.-Y. Yang*, Development of a novel low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite material, Microsyst. Technol. 26 (2020) 2561–2567. IF = 1.61
    7. Y.-Y. Huang, K.-C. Ke, S.-Y. Yang*, Fabrication of large-area V-groove microstructures using gasbag-pressuring edge-irradiating UV imprinting, Microsyst. Technol. 25 (2019) 811–817. IF = 1.61
    8. X.-L. Chen, K.-C. Ke, N.-W. Chang, Y.-H. Chen, S.-Y. Yang*, Fabrication of Double-Sided Micro-Lens Array Using UV Injection Molding, Int. Polym. Process. 34 (2019) 20–29. IF = 0.96
    9. N.-W. Chang, K.-C. Ke, S.-Y. Yang*, Fabrication of a light -intensity-enhancement component by using computer-controlled ultraviolet curing and air-pressing imprinting, Microsyst. Technol. (2018). IF = 1.61
    10. K.-C. Ke, C. Cheng, L.-J. Lin, S.-Y. Yang*, A novel flexible heating element using graphene polymeric composite ink on polyimide film, Microsyst. Technol. (2018) 1–7. IF = 1.61
    11. Y.-H. Lee, K.-C. Ke, N.-W. Chang, S.-Y. Yang*, Development of an UV rolling system for fabrication of micro/nano structure on polymeric films using a gas-roller-sustained seamless PDMS mold, Microsyst. Technol. 24 (2018) 2941–2948. IF = 1.61
    12. C. Cheng, K.-C. Ke, S.-Y. Yang*, Application of graphene–polymer composite heaters in gas-assisted micro hot embossing, RSC Adv. 7 (2017) 6336–6344. IF = 3.07
    13. Y.-M. Shih, C.-C. Kao, K.-C. Ke, S.-Y. Yang*, Imprinting of double-sided microstructures with rapid induction heating and gas-assisted pressuring, J. Micromechanics Microengineering. 27 (2017) 095012. IF = 2.141
    1. 鄭卉雅、林星瑜、柯坤呈、黃明賢*, 資訊擷取系統應用於智慧射出成型品質監控之開發, 中國機械工程學會第三十六屆全國學術研討會, 2019 Dec. 7-8, 臺北市, 中華民國
    2. K.-C. Ke, S.-Y. Yang*, “Fabrication of Microstructure by A Novel Flexible Heating Element that Uses Graphene-polymer Composite Heaters and Rolling Hot Embossing”, 2018 21 - 25 May, 34th International Conference of Polymer Processing Society 2018 (PPS-34), Taipei city, Taiwan.
    3. R.-H. Hong, K.-C. Ke, N.-W. Chang and S.-Y. Yang*, “Fabrication of Periodically Nanostructure Using Nanosphere Lithography”, International Conference on Mechanical Engineering and Applied Composite Materials (MEACM2017), 2017 Nov. 23, Hong Kong, China. (Poster)
    4. K.-Y. Chen, K.-C. Ke, and S.-Y. Yang*, “Fabrication of Double-sided Aspheric Microlens Array Using UV-curing Imprinting”, International Conference on Engineering and Innovative Materials, 2017 Sep. 3, Tokyo, Japan. (Poster)
    5. C-C Kao, K.-C. Ke, S.-Y. Yang, “Hot Embossing of Microstructures with Moving Induction Heating and Gas-Assisted Pressuring” , 34th International Conference of the Polymer Processing Society, Taipei, Taiwan, May 21-25 2018
    6. K-H Lin, K.-C. Ke, S.-Y. Yang, “Development of Seamless Roller with Anodic Aluminum Oxide (AAO) Nano-Structures with Its Application on Roller Hot Embossing”, 34th International Conference of the Polymer Processing Society, Taipei, Taiwan, May 21-25 2018
    7. K.-C. Ke, S-L Chen, S.-Y. Yang, “UV-curing Imprinting of Double-sided Aspheric Microlens Array”, 2017 6th International Conference on Engineering and Innovative Materials (ICEIM 2017)--SCOPUS, Tokyo, Japan, 2017
    8. C-C Kao, K.-C. Ke, Hong W-C, Chang N-W, S.-Y. Yang, ” Hot Embossing of Microstructure with Moving Induction Heating and Gas-Assisted Pressuring”, The 34th National Conference on Mechanical Engineering of CSME, 2017, Taichung, Taiwan
    9. Cheng T-Y, Chang N-W, Huang C-Y, K.-C. Ke, S.-Y. Yang, ” Fabrication of Microlens Array on Disk Using Micro-Injection Compression Molding Process”, The 34th National Conference on Mechanical Engineering of CSME, 2017, Taichung, Taiwan
    10. P-C Kuo, K.-C. Ke, Suen Y, Chang N-W, S.-Y. Yang, ” Fabrication of Biomimetic Dry-Adhesion Structures  Using Anodic Aluminum Oxide and Nanosphere Lithography”, The 34th National Conference on Mechanical Engineering of CSME, 2017, Taichung, Taiwan
    11. Chen S-L, Chang N-W, Cheng Y-H, K.-C. Ke, S.-Y. Yang, ” Fabrication of Double-sided Microlens Array Using UV Injection Molding”, The 34th National Conference on Mechanical Engineering of CSME, 2017, Taichung, Taiwan
    12. Lu Y-T, K.-C. Ke, Chen L-C, Chang N-W, S.-Y. Yang, ” Application of Graphene-polymer Composite Heaters in Soft Roller Hot Embossing Process” , The 34th National Conference on Mechanical Engineering of CSME, 2017, Taichung, Taiwan
    13. Cheng C, K.-C. Ke, S.-Y. Yang, ” Application of graphene–polymer composite heaters in gas-assisted micro hot embossing”, The 33th National Conference on Mechanical Engineering of CSME, 2016,Hsinchu, Taiwan
    14. Y-M Shih, C-C Kao, K.-C. Ke, S.-Y. Yang, ” Application of graphene–polymer composite heaters in gas-assisted micro hot embossing” , The 33th National Conference on Mechanical Engineering of CSME, 2016, Hsinchu, Taiwan
    15. C-M Chen, T-Y Cheng, N-W Chang, K.-C. Ke, S.-Y. Yang, ” Co-Injection Compression Molding of Double-sided Microlens Array”, The 33th National Conference on Mechanical Engineering of CSME, 2016, Hsinchu, Taiwan
    16. S.-Y. Yang, K.-C. Ke, K-Y Chen, Chen S-L, ” UV-curing Imprinting of Double-sided Aspheric Microlens Array”, The 33th National Conference on Mechanical Engineering of CSME, 2016, Hsinchu, Taiwan
    17. K.-C. Ke, K-Y Chen, S.-Y. Yang, ” Development of Hot Embossing of Double-sided Micro Lens Array”, The 32th National Conference on Mechanical Engineering of CSME, 2015, Kaohsiung, Taiwan 
Back to Top