成員

何旭川 教授兼系主任

  • 學歷
    1990 Ph.D. The University of California, Los Angeles

    1984 M.S. State University of New York, Buffalo

    1978 B.S. National Cheng-Kung University
    經歷
    2013–present Professor
    Department of Mechanical Engineering
    Yuan Ze University

    1992–2013 Associate Professor
    Department of Mechanical Engineering
    Yuan Ze University

    1990–1991 Post Doctor
    Department of Mechanical, Aerospace, and Nuclear Engineering
    The University of California, Los Angeles
    研究專長
    奈米複合材料、破壞力學、光纖感測、非破壞檢測

    研究主題:
    智慧型結構與材料、光纖感測、壓電致動
    複合材料結構、撞擊損傷、修補分析
    超音波非破壞檢測
    奈米薄膜與奈米複合材料
    結構破壞與損傷分析
  • 國際期刊

    1. Shiuh-Chuan Her* and Wei-Nan Lin, 2020 July “Simultaneous Measurement of Temperature and Mechanical Strain Using a Fiber Bragg Grating Sensor”, Sensors, Vol. 20, 4223; doi:10.3390/s20154223     SCI

    2. Shiuh-Chuan Her* and Han-Yung Chen, 2020 July “Deformation of Composite Laminates Induced by Surface Bonded and Embedded Piezoelectric Actuators”, Materials, 2020, Vol. 13, 3201; doi:10.3390/ma13143201     SCI

    3. Shiuh-Chuan Her* and Wei-Chun Hsu, 2020 May “Strain and Temperature Sensitivities Along with Mechanical Properties of CNT Buckypaper Sensors”, Sensors, Vol. 20, 3067; doi:10.3390/s20113067    SCI

    4. Shiuh-Chuan Her* and Pao-Chu Chien, 2020 May “Mode II Interfacial Fracture Toughness of Multi-Walled Carbon Nanotubes Reinforced Nanocomposite Film on Aluminum Substrate”, Nanomaterials, Vol. 10, 904; doi:10.3390/nano10050904  SCI

    5. Shiuh-Chuan Her* and Lei-Yao Chen, 2019 Sep. “Fabrication and Characterization of Graphene/Epoxy Nanocomposites”, Materials Science (MEDŽIAGOTYRA), 2019, Vol. 25, pp. 433-440    SCI

    6. Shiuh-Chuan Her* and Cheng-Feng Chan, 2019 July “Interfacial Stress Analysis of Adhesively Bonded Lap Joint”, Materials, 2019, 12, 2403; doi:10.3390/ma12152403   SCI

    7. Shiuh-Chuan Her* and Shin-Chieh Chung, 2019 July “Dynamic Responses Measured by Optical Fiber Sensor for Structural Health Monitoring”, Applied Sciences, 2019, 9, 2956; doi:10.3390/app9152956    SCI

    8. Shiuh-Chuan Her* and Wen-Bin Chu, 2019 Mar. “3D Surface Profile Construction And Flaw Detection In a Composite Structure”, Strength of Materials, Vol. 51, No. 1, pp.130-137.  https://DOI 10.1007/s11223-019-00058-9   SCI

    9. JianRen Huang, XiaoXiang Yang, Shiuh-Chuan Her* and Yuan-Ming Liang, 2019 Jan. “Carbon Nanotube/Graphene Nanoplatelet Hybrid Film as a Flexible Multifunctional Sensor”, Sensors, Vol. 19, 317. https://doi:10.3390/s19020317    SCI

    10. JianRen Huang, Shiuh-Chuan Her*, XiaoXiang Yang and MaNan Zhi, 2018 Oct. “Synthesis and Characterization of Multi-Walled Carbon Nanotube/Graphene Nanoplatelet Hybrid Film for Flexible Strain Sensors”, Nanomaterials, Vol. 8, 786. https://doi.org/10.3390/nano8100786    SCI

    11. Shiuh-Chuan Her* and Pao-Chu Chien, 2018 April “Load transfer of nanocomposite film on aluminum substrate, Journal of Applied Biomaterials & Functional Materials, Vol. 16 (IS),  pp.10-16     SCI

    12. Shiuh-Chuan Her* and Han-Yung Chen, 2018 April “Stress analysis of sandwich composite beam induced by piezoelectric layer”, Journal of Applied Biomaterials & Functional Materials, Vol. 16 (IS),  pp.132-139   SCI

    13. Shiuh-Chuan Her* and Kuan-Yu Lin, 2017 June “Dynamic Mechanical Analysis of Carbon Nanotubes Reinforced Nanocomposites”, Journal of Applied Biomaterials & Functional Materials, Vol. 15 (suppl 1),  pp. S13-S18     SCI

    14. Shiuh-Chuan Her* and Chun-Fu Chang, 2017 Apr. “Fabrication and Characterization of Indium Tin Oxide Films”, Journal of Applied Biomaterials & Functional Materials, Vol. 15,  pp. e170-e175     SCI

    15. Shiuh-Chuan Her* and Pao-Chu Chien, 2017 Apr. “Fracture Analysis of MWCNT/Epoxy Nanocomposite Film Deposited on Aluminum Substrate”, Materials, Vol. 10, pp. 408; doi:10.3390/ma10040408    SCI

    16. Shiuh-Chuan Her* and Chun-Fu Chang, 2016 Sep. “Effect of Sputtering Power on Optical and Electrical Properties of Indium Tin Oxide Films ”, Sensors and Materials, Vol. 28, No. 9, pp. 975–981    SCI

    17. Shiuh-Chuan Her* and Chih-Ying Huang, 2016 Sep. “Thermal Strain Measured by Fiber Bragg Grating Sensors”, Sensors and Materials, Vol. 28, No. 9, pp.939–946    SCI

    18. Shiuh-Chuan Her* and Chih-Ying Huang, 2016 Jan. “The Effects of Adhesive and Bonding Length on the Strain Transfer of Optical Fiber Sensors”, Applied Sciences, Vol. 6, No. 1, 13; doi:10.3390/app6010013    SCI

    19. Shiuh-Chuan Her* and Hao-Hi Chang, 2015 Dec. “Stress Intensity Factors of a Semi-Elliptical Crack in a Hollow Cylinder”, Transactions of the Canadian Society for Mechanical Engineering, Vol. 39, No. 3, pp 557-568   SCI

    20. Shiuh-Chuan Her* and Tsung-Chi Chi, 2015 Dec. “Optical and Electrical Performance of ZnO Films Textured by Chemical Etching”, Materials Science Vol. 21, pp 502-505    SCI

    21. Shiuh-Chuan Her* and Han-Yung Chen, 2015 Nov. “Stress analysis of bi-layered composite beam induced by piezoelectric actuator”, Materials Research Innovations Vol. 19 supplement 8, pp S8 114-117   SCI

    22. Shiuh-Chuan Her* and Yi-Hsiang Wang, 2015 June. “Temperature effect on microstructure and mechanical properties of aluminum film deposited on glass substrates”, Indian Journal of Engineering & Materials Sciences, Vol. 22, pp. 268-272  SCI

    23. Shiuh-Chuan Her* and Ching-Chun Liao, 2015 Apr. “Impact Analysis of Composite Laminate Shell Structures”, Applied Mechanics and Materials Vols 764-765, pp 1185-1188   EI

    24. Shiuh-Chuan Her* and Hao-Hsi Chang, 2015 Apr. “Fracture Analysis of a Semi-Elliptical Surface Crack in Hollow Cylinders”, Applied Mechanics and Materials Vols 764-765, pp 1175-1179   EI

    25. Shiuh-Chuan Her* and Wei-Bo Su, 2015 Jan. “Interfacial Fracture Toughness of Multilayer Composite Structures”, Strength of Materials, Vol. 47, pp. 186-191  SCI

  • (一) 國際性會議論文

    1. Shiuh-Chuan Her and Jr-Luen Tsai, 2019, Optical Fiber Sensor for the Simultaneous Measurements of Strain and Temperature, International Conference on Materials Research & Nanotechnology, 2019 June 10-12, Rome, Italy.

    2. Shiuh-Chuan Her and Kai-Chun Zhang, 2018, Fabrication and Characterization of Graphene/Epoxy Nanocomposite Film, European Advanced Energy Materials and Technology Congress, 2018 Mar. 25-28, Stockholm, Sweden.

    3. Shiuh-Chuan Her and Cheng-Feng Chan, Analytical Solutions of Shear and Peeling Stresses in Double-Lap Adhesive Bonded Joints, 4th International Conference on Structural Adhesive Bonding, 2017 July 6-7, Porto, Portugal.

    4. Shiuh-Chuan Her and Han-Yung Chen, Stress Analysis of Sandwich Composite Beam Induced by Piezoelectric Layer, International Conference on Advances in Functional Materials, 2016 Aug. 8-11, Jeju Island, South Korea.

    5. Shiuh-Chuan Her and Pao-Chu Chien, Characterization of MWCNT/Epoxy Nanocomposite Film Deposited on Aluminum Substrate, International Conference on Advances in Functional Materials, 2016 Aug. 8-11, Jeju Island, South Korea.

    6. Shiuh-Chuan Her and Hsi-Wen Hou, 2016, Impact Response of a Cantilever Beam Measured by Optical Fiber Sensors, ALLSENSORS 2016 : The First International Conference on Advances in Sensors, Actuators, Metering and Sensing, 2016 4/24~28, Venice Italy

     

    (二) 一般性會議論文

    1. 李育瑾,賴伯瑞,何旭川,2019,含裂縫之平板結構修補分析,中國機械工程學會第36屆學術研討會,2019/12/7~8,台灣台北市

    2. 何旭川,徐維駿,2019,巴克紙浸漬環氧樹脂機械性質分析,中國機械工程學會第36屆學術研討會,2019/12/7~8,台灣台北市

    3. 何旭川,翁信忠,2019,應用光纖光柵檢測薄膜楊氏係數,中國機械工程學會第36屆學術研討會,2019/12/7~8,台灣台北市

    4. 何旭川,郭仕堯,2019,噴流流量與堵塞之感測,中華民國力學學會第43屆全國力學會議,2019/11/29~30,台灣台中市

    5. 何旭川,黃為達,2019,多壁奈米碳管薄膜巴克紙機械性質分析,中華民國力學學會第43屆全國力學會議,2019/11/29~30,台灣台中市

    6. 何旭川,彭國儒,2018,無人機翼肋結構分析與拓撲最佳化設計研究,中國機械工程學會第35屆學術研討會,2018/11/30~12/1,台灣嘉義

    7. 何旭川,黃為達,2018,多壁奈米碳管薄膜(巴克紙)電學性質分析,中國機械工程學會第35屆學術研討會,2018/11/30~12/1,台灣嘉義

    8. 何旭川,郭仕堯,2018,噴流管壓力之光纖感測,中國機械工程學會第35屆學術研討會,2018/11/30~12/1,台灣嘉義

    9. 何旭川,陳磊耀,2018,石墨烯奈米複合材料機械性質分析,中華民國力學學會第42屆全國力學會議,2018/11/23~24,台灣台北市

    10. 何旭川,林冠宇,2018,多壁奈米碳管複合材料機械性質分析,中華民國力學學會第42屆全國力學會議,2018/11/23~24,台灣台北市

    11. 何旭川,陳磊耀,2017,石墨烯/奈米碳管複合材料機械性質分析,中國機械工程學會第34屆學術研討會,2017/12/1~2,台灣台中

    12. 何旭川,林冠宇,2017,多壁奈米碳管複合材料熱學性質分析,中國機械工程學會第34屆學術研討會,2017/12/1~2,台灣台中

    13. 何旭川,錢保竹,2016,奈米碳管複合材料薄膜破壞模式I破壞韌性分析,中國機械工程學會第33屆學術研討會,2016/12/3~4,台灣新竹

    14. 何旭川,林士軒,2016,應用光纖光柵反射光波長監測噴流管壓力,中國機械工程學會第33屆學術研討會,2016/12/3~4,台灣新竹

    15. 何旭川,何孟翰,2016,應用光纖光柵偵測衝擊力與位置,中華民國力學學會第40屆全國力學會議,p. 123,2016/11/25~26,台灣新竹

    16. 何旭川,錢保竹,2016,奈米碳管複合材料薄膜破壞模式II破壞韌性分析,中華民國力學學會第40屆全國力學會議,p. 87,2016/11/25~26,台灣新竹

    17. 何旭川,張峻輔,2015,薄膜厚度對氧化銦錫(ITO)透明導電層光電性質之影響,中華民國力學學會第三十九屆全國力學會議,p. 155,2015/11/20~21,台灣台北

    18. 何旭川,林威男,2015,光纖光柵同時量測結構應變與溫度,中華民國力學學會第三十九屆全國力學會議,p. 92,2015/11/20~21,台灣台北

    19. 何旭川,張峻輔,2015,退火溫度對氧化銦錫(ITO)透明導電層光電性質之影響,中國機械工程學會第三十二屆學術研討會,2015/12/11~12,台灣高雄

    20. 何旭川,何孟翰,2015,應用光纖感測器量測撞擊位置與強度,中國機械工程學會第三十二屆學術研討會,2015/12/11~12,台灣高雄

  • 擔任國際著名期刊編輯委員

    1. International Journal of Material and Mechanic Engineering

    2. Journal of Applied Mechanical Engineering

    3. International Journal of Mechanical Engineering and Applications

    4. American Journal of Nanoscience and Nanotechnology

     擔任國際著名SCI 期刊論文審查委員

    1. 擔任ASME Journal of Applied Mechanics 期刊論文審查委員

    2. 擔任 NANO 期刊論文審查委員

    3. 擔任IEEE Sensor Journal 期刊論文審查委員

    4. 擔任 Sensors 期刊論文審查委員

    5. 擔任 Journal of ADHESION SCIENCE and TECHNOLOGY 期刊論文審查委員

    6. 擔任 Computational Materials Science 期刊論文審查委員

    7. 擔任 Materials 期刊論文審查委員

    8. 擔任 Journal of Composite Materials 期刊論文審查委員

    9. 擔任 Surface and Interface Analysis 期刊論文審查委員

    10. 擔任 Physical Review & Research International 期刊論文審查委員

    11. 擔任 Sensor Letters 期刊論文審查委員

    12. 擔任 Applied Sciences 期刊論文審查委員

    13. 擔任 Smart Materials and Structures 期刊論文審查委員

    14. 擔任 Journal of Nondestructive Evaluation 期刊論文審查委員

    15. 擔任 Journal of Polymer Engineering 期刊論文審查委員

  • 計畫名稱

    起迄年月

    補助或委託機構

    人機協同與設備物聯網產學合作計畫

    2020/01/02~2020/12/10

    工業技術研究院

    具可撓式高靈敏度與多功能之新型石墨烯/奈米碳管薄膜感測器開發與應用研究

    2019/08/01~2021/07/31

    科技部

    智慧機器手臂與設備物聯網產學合作計畫

    2019/01/02~2019/12/10

    工業技術研究院

    新型光纖感測器量測高加速度與熱循環之結構動態響應

    2018/08/01~2019/07/31

    科技部

    塗刀預塗輪裝置設計與製造

    2018/07/01~2020/06/30

    亞智科技股份有限公司

    奈米碳管薄膜(巴克紙)製程開發、性質檢測與應用研究

    2015/08/01~2018/07/31

    科技部

    蝕刻製程腐蝕液流量監控

    2015/06/01~2016/05/31

    科技部

    石墨烯/奈米碳管複合材料製備與機械、熱學性質檢測及應力傳遞分析

    2014/08/01~2015/07/31

    科技部

    應用光纖感測器量測電路板蝕刻製程噴流管內壓力

    2013/11/01~2014/10/31

    科技部

    高爾夫球頭振動去殼模參數與效益分析

    2015/12/10~2016/12/09

    復盛應用科技股份有限公司

    沖孔品質提升先導分析

    2014/07/15~2015/01/15

    江申工業公司

    產業先進設備人才培育計畫

    2014/01/01~2014/12/31

    教育部

     
Back to Top