成員

蘇艾 教授

  • 學歷
    1989 Ph.D. Georgia Institute of Technology, Atlanta , GA

    1984 M.S. The Ohio State University, Columbus , OH

    1978 B.S. National Cheng-Kung University
    經歷
    2005–present Professor
    Department of Mechanical Engineering
    Yuan Ze University

    1999–2014 Director,
    Green Technology Research Center
    Yuan Ze University

    1993–1999 Chairman
    Department of Mechanical Engineering
    Yuan Ze University

    1991–2005
    Associate Professor
    Department of Mechanical Engineering
    Yuan Ze University

    1989–1991 Post Doctoral Fellow
    Georgia Institute of Technology

    1980–1982 Research associate
    Aero- Insdustry Development Center,
    Taichung, Taiwan

    研究專長
    轉子動力學、燃燒學、鍋爐設計及污染控制、燃料電池水熱管理
    得獎或研究成果
    2006年 有庠傑出教授
    2007年 元智大學研究傑出獎
    2009年 有庠元智講座
    2013年 第九屆有庠元智講座
  •  

    1. Lee, C. Y., Weng, F. B., Hsieh, C. Y., Su, A., Liu, F. H. , Cheng, C. K. and Shiu, Y. C., 2017, “Flexible Multiple Micro Sensor for Local Persistent Effect Test in High Temperature Proton Exchange Membrane Fuel Cell Stack,” International Journal of Electrochemical Science, 12, pp. 5503-5510. (SCI)

    2. Hsieh, C. Y., Nguyen, X. V., Weng, F. B., Kuo, T. W., Lee, C. Y. and Su, A., 2017, “Developing Hybrid-Power Fuel Cells with a Low-Pressure Hydrogen-Storage System used in an Electric Forklifts,” International Journal of Electrochemical Science, 12, pp. 6266-6281. (SCI)

    3. Wang, S. L., Su, A., Huang, Y. R. and Chang, Y. F., 2017, “Analysis of Motorcycle Exhaust Emissions vis the Taguchi Method,” Journal of Residuals Science & Technology, 14, No. 3, pp. 642-650. (SCI)

    4. Chen, C. W., Su, A., Yeh, C. C., Yu, J. W., Lu, Y. T. and Jung, G. B., 2016, “Electrochemical Generation of Ozone: Comparison of IrO2 Series with Pt/SnO2 Anode Support in Solid Membrane Cell,” International Journal of Electrochemical Science, 11, pp. 3351-3363. (SCI)

    5. Wang, S. L. , Chang, Y. F., Su, A. and Wang, J. Y., 2015, “Research of Gas Water Cycling System the Laboratory Immersion Corrosion Test of Metal,” International Journal of Engineering Research & Science, Vol.1, Issue 7, pp. 51-54. 

    6. Wang, S. L., Chang, Y. F., Su, A. and Wang, Y. T., 2015, “Research the Heat Transfer Simulation Analysis of Water Heater Pipeline Flow Channel System,” International Journal of Engineering Research & Science, Vol.1, Issue 7, pp. 92-95. 

    7. Chiang, T. Y. and Su, A., 2015, “Study on the Properties of Fuel Cell 304 Stainless Steel Bipolar Plates with Flow Channels Milled Using Different Methods,” International Journal of Electrochemical Science, 10, pp. 9556-9570. (SCI)

    8. Lee, C. Y., Fang, L. H., Su, A., Liu, Y. M. and Lee, C. J., 2015, “Real Time Interior Water and Thermal Monitoring of Fuel Cell with Micro 3-in-1 Sensor,” Renewable Energy, 74, 517-522. (SCI)

    9. Lee, C. Y., Fang, L. H, Su, A., Huang, Y. T. and Liang, Y. C., 2015, “Application of Screen Printing in Flexible Miniature Thermocouple Process Development,” International Journal of Electrochemical Science, 10, pp. 3082-3087. (SCI)

    10. Lee, D. J., Lee, C. Y., Chang, J. S., Liao, Q and Su, A., 2015, “Treatment of Sulfate/Sulfide-Containing Wastewaters using Microbial Fuel Cell: Single and Two Anode Systems”, International Journal of Green Energy, 12, pp. 998-1004. (SCI)

    11. Chiang, T. Y., Su, A., Tsai, L. C., Sheu, H. H. and Chang. C. C., 2015, “Effect of Metal Bipolar Plate Channel Fabrication on Electroplating – Using Nickel Electroplating of AISI 1045 Channel Substrate as an Example,” International Journal of Electrochemical Science, 10, pp. 1926-1939. (SCI) 

    12. Yang, T. F., Cheng, C. H., Su, A., Yu, T. L. and Hourng, L. W., 2014, “Numerical Analysis of the Manipulated High Performance Catalyst Layer Design for Polymer Electrolyte Membrane Fuel Cell,” International Journal of Energy Research, 38, pp. 1937-1948. (SCI)

    13. Chang, T. Y., Su, A., Wang, S. L., Wang, Y. H., 2014, “Analysing Relationship between the Performance of Fan and the Area of the Porous Thin Plate,” Journal of Environmental Protection and Ecology, 15, No 3A, pp. 1347–1357.(SCI)

    14. Chiang, T. Y., Su, A., Tsai, L. C., Sheu, H. H. and Lu, C. E, 2014, “Corrosion Resistance of 5052 Al-alloy with a Zirconia-Rich Conversion Coating used in Bipolar Plates in PEMFCs,” International Journal of Electrochemical Science, 9, pp. 5850-5863. (SCI)

    15. Wang, X. D., Wang, Y. L., Chen, Y., Si, C., Su, A. and Lee, D. J., 2014, “Proton Exchange Membrane Fuel Cell Modeling with Diffusion Layer-Based and Sands-Based Capillary Pressure Correlations: Comparative Study,” Journal of the Taiwan Institute of Chemical Engineers, 45, pp. 1532-1541. (SCI)

    16. Li, H., Cheng, X., Weng, F. B., Su, A. and Chiang, Y. C., 2014, “Nitrogen-Doped Carbon Nanotubes Prepared at Different Temperatures for Oxygen Reduction Reaction,” Journal of the Electrochemical Society, 161(12), F1140-1145. (SCI)

    17. Huang, Z. M, Su, A. and Liu, Y. C., 2014, “Development and Testing of a Hybrid System with a Sub-kW Open-Cathode Type PEM Fuel Cell Stack,” Energy, 72, pp.547-553. (SCI)

    18. Huang, Z. M., Su, A. and Liu, Y. C., 2014, “A High-Efficiency, Compact Design of Open-Cathode Type PEMFCs with a Hydrogen Generation System,” Fuel, 122, pp. 76-81. (SCI)

    19. Su, A., Chiang, H. L. and Huang, Z. M., 2013, “Combination of Chemical Hydride Hydrogen Generation System with Low-Temperature PEMFCs,” Applied Mechanics and Materials, Vols. 253-255, pp. 751-759. (EI)

    20. Su, A., Ferng, Y. M. and Tsai, X. Y., 2013, “Investigating Effects of Polybenzimidazole Loading Design in the Catalyst Layer on the Performance of Polybenzimidazole-Based High-Temperature Proton Exchange Membrane Fuel Cell through Experiments and Simulations”, International Journal of Energy Research, Vol. 37, pp. 1213-1222. (SCI)

    21. Huang, Z. M., Su, A. and Liu, Y. C., 2013, “Hydrogen Generation with Sodium Borohydride Solution by Ru Catalyst”, International Journal of Energy Research, Vol. 37, pp. 1187-1195. (SCI)

    22. Lee, D. J., Su, A., Mujumdar, A. S., 2013, “Bound Water Content in Wet Materials,” Drying Technology, 31, pp. 202-206. (SCI)

    23. Huang, Z. M., Su, A. and Liu, Y. C., 2013, “Hydrogen Generator System using Ru Catalyst for PEMFC Applications,” Energy, Vol. 51, pp. 230-236. (SCI)

    24. Liu, L., Tsyganova, O., Lee, D. J., Su, A., Chang, J. S., Wang, A. and Ren, N., 2012, “Anodic Biofilm in Single-Chamber Microbial Fuel Cells Cultivated under Different Temperatures,” International Journal of Hydrogen Energy, Vol. 37, pp. 15792-15800. (SCI)

    25. Lee, C. Y., Ho, K. L., Lee, D. J., Su, A. and Chang, J. S., 2012, “Electricity Harvest from Wastewaters using Microbial Fuel Cell with Sulfide Sole Electron Donor,” International Journal of Hydrogen Energy, Vol.37, pp. 15787-15791. (SCI)

    26. Ho, K. L., Lee, D. J., Su, A., Chang, J. S., 2012, “Biohydrogen from Lignocellulosic Feedstock via One-step Process,” International Journal of Hydrogen Energy, Vol. 37, pp. 15569-15574.  (SCI)

    27. Ho, K. L., Lee, D. J., Su, A., Chang, J. S., 2012, “Biohydrogen from Cellulosic Feedstock: Dilution-to-Stimulation Approach,” International Journal of Hydrogen Energy, Vol. 37, pp. 15582-15587.  (SCI)

    28. Lee, C. Y., Ho, K. L., Lee, D. J., Su, A., Chang, J. S., 2012, “Electricity Harvest from Nitrate/sulfide-containing Wastewaters using Microbial Fuel Cell with Autotrophic Denitrifier, Pseudomonas sp. C27,” International Journal of Hydrogen Energy, Vol. 37, pp. 15827-15832. (SCI)

    29. Huang, T. H., Shen, H. L., Jao, T. C., Weng, F. B. and Su, A., 2012, “Ultra-Low Pt Loading for Proton Exchange Membrane Fuel Cells by Catalyst Coating technique with Ultrasonic Spray Coating Machine,” International Journal of Hydrogen Energy, 37, pp. 3872-3879. (SCI)

    30. Jao, T. C., Jung, G. B., Kuo, S. C., Tzeng, W. J. and Su, A., 2012, “Degradation Mechanism Study of PTFE/Nafion membrane in MEA Utilizing an Accelerated Degradation Technique,” International Journal of Hydrogen Energy, 37, pp. 3623-3630. (SCI)

    31. Zheng, Q., Cheng, X., Jao, T. C., Weng, F. B., Su, A., Chiang, Y. C., 2012, “Degradation Analysis of Ru85Se15 Catalyst Layer in Proton Exchange membrane Fuel Cells,” Journal of Power Sources, 218, pp. 79-87. (SCI)

    32. Su, A., Ferng, Y. M., Chen, W. T., Cheng, C. H., Weng, F. B. and Lee, C. Y., 2012, “Investigating the Transport Characteristics and Cell Performance for a Micro PEMFC through the Micro Sensors and CFD Simulations,” International Journal of Hydrogen Energy, 37, pp. 11321-11333. (SCI)

    33. Feng, W., Li, H., Cheng, X., Jao, T. C., Weng, F. B., Su, A. and Chiang, Y. C., 2012, “A Comparative Study of Pyrolyzed and Doped Cobalt-Polypyrrole Electrocatalysts for Oxygen Reduction Reaction,” Applied Surface Science, 258, pp.4048-4053. (SCI)

    34. Su, A., Ferng, Y. M., Hou, J., Yu, T. L., 2012, “Experimental and Numerical Investigations of the Effects of PBI Loading and Operating Temperature on a High-Temperature PEMFC,” International Journal of Hydrogen Energy, 37, pp.7710-7718. (SCI)

    35. Zheng, Q., Cheng, X., Jao, T. C., Weng, F. B., Su, A., Chiang, Y. C., 2012, “Fuel Cell Performances at Optimized Nafion and Ru85Se15 Loading in Cathode Catalyst Layer,” Journal of Power Sources, 201, pp. 151-158. (SCI)

    36. Cheng, C. H., Su, A., Chan, S. H., 2012, “Computer Aided Design of the Reversible Solid Oxide Fuel Cell Air Electrode,” Advanced Materials Research, 485, pp. 532-535. (EI)

    37. Jao, T. C., Jung, G. B., Ke, S. T., Chi, P. H. and Su, A., 2011, “In Situ Analysis of MEA Performance under Accelerated Degradation Testing,” International Journal of Energy Research, 35, pp. 1284-1290. (SCI)

    38. Juang, Y. C., Su, A., Fang, L. H., Lee, D. J., Lai, J. Y., 2011, “Fouling with Aerobic Granule Membrane Bioreactor,” Water Science and Technology, 64(9):1870-5 (SCI)

    39. Zheng, Q., Cheng, X., Jao, T. C., Weng, F. B., Su, A., Chiang, Y. C., 2011, “Microwave Assisted Synthesis of High Performance Ru85Se15/MWCNTs Cathode Catalysts for PEM Fuel Cell Applications,” International Journal of Hydrogen Energy, Vol. 36, pp. 14599-14607. (SCI)

    40. Liu, L, Lee, C. Y., Ho, K. C., Nien, P. C., Su, A., Wang, A., Ren, N. and Lee, D. J., 2011, “Occurrence of Power Overshoot for Two-Chambered MFC at Nearly Steady-State Operation,” International Journal of Hydrogen Energy, Vol. 36, pp. 13896-13899. (SCI)

    41. Lee, D. J., Tai, J., Adav, S. S. and Su, A., 2011, “Harvesting biohydrogen from Toxic Wastewater using Isolated Strain,” International Journal of Hydrogen Energy, Vol. 36, pp. 13907-13913. (SCI)

    42. Lee, D. J., Show, K. Y. and Su, A., 2011, “Dark Fermentation on Biohydrogen Production: Pure Culture,” Bioresource Technology, 102, Issue 18, pp.8393-8402. (SCI)

    43. Lee, S. H., Ma, C. C.M., Yuen, S. M., Teng, C. C., Liao, S. H., Huang, Y. L., Tsai, M. C., Su, A. and Wang, I., 2011, “Magnetic Field Enhances the Graphitized Structure and Field Emission Effect of Carbon Nanotubes,” Thin Solid Films, 519, pp.4166-4173. (SCI)

    44. Hung, I. M., Ciou, C. J., Zeng, Y. J., Wu, J. S., Lee, Y. C., Su, A., Chan, S. H., 2011, “Conductivity and Electrochemical Performance of (Ba0.5Sr0.5)0.8La0.2Fe1−xMnxO3−δ Cathode Prepared by the Citrate–EDTA Complexing method,” Journal of the European Ceramic Society, Vol. 31, pp. 3095-3101. (SCI)

    45. Wang, X. D., Xu, J. L., Yan, W. M., Lee, D. J., Su, A. , 2011, “Transient Response of PEM Fuel Cells with Parallel and Interdigitated Flow Field Designs,” International Journal of Heat and Mass Transfer, 54, pp. 2375-2386. (SCI)

    46. Yan, W. M., Wang, X. D., Lee, D. J., Zhang, X. X., Guo, Y. F. and Su, A., 2011, “Experimental Study of Commercial Size Proton Exchange Membrane Fuel Cell Performance,” Applied Energy, 88, pp.392-396. (SCI)

    47. Wu, S. D., Chou, C. P., Su, A. and Hwang, J. J., 2011, “Design and Performance Test of the Direct Methanol Fuel Cell System,” Journal of Fuel Cell Science and Technology, 8(2), Article number 025001. (SCI)

    48. Leu, J. H., Su, A., Huang, Z. M., Liu, Y. C., Lin, C. Y., 2011, “Study of Catalytic Hydrolysis of Alkaline NaBH4 Solution by Ru/Ni Foam Catalyst,” Advanced Materials Research, Vols. 233-235, pp. 1468-1473. (EI)

    49. Leu, J. H., Wu, L. F. and Su, A., 2011, “Manufacture of Non-Toxic Lava from Recovery of the Incineration Ash by Plasma Fusing Technology,” Advanced Materials Research, Vols. 194-196, pp. 2365-2375. (EI)

    50. Yang, T. F., Hourng, L. W., Yu, T.L., Chi, P. H., Su, A.,2010, “High Performance Proton Exchange Membrane Fuel Cell Electrode Assemblies,” Journal of Power Sources, 195, pp. 7359-7369. (SCI)

    51. Liao, S. H., Hsiao, M. C., Yen, C. Y., Ma, C. C., Lee, S. J., Su, A., 2010, Tsai, M. C., Yen, M. Y. And Liu, P. L., “Novel Functionalized Carbon Nanotubes as Cross-Links Reinforced Vinyl Ester/Nanocomposite Bipolar Plates for Polymer Electrolyte membrane Fuel Cells,” Journal of Power Sources, 195, pp. 7808-7817. (SCI)

    52. Su, A., Chen, S. Y. and Liu, Y. C., 2010, “A Study of an LED Backlight Thermal Module,” Heat Transfer-Asian Research, 39(8), pp. 619-627. (EI)

    53. Su, A., Liu, Y. C., Lin, W. C., Cheng, C. K. and Hsieh, C. Y., 2010, “A Study on the Integration of Micro-Reformer and High-Temperature PEM Fuel Cell,” Heat Transfer-Asian Research, 39(8), pp. 611-618. (EI)

    54. Yang, Z., Su, A., Mujumdar, AS and Lee, D. J., 2010, “Electroosmotic Flows in Sludge at Dewatering,” Drying Technology, Vol. 28, Issue 9, pp.1113-1117. (SCI)

    55. Tai, J., Adav, S. S., Su, A. and Lee, D. J., 2010, “Biological Hydrogen Production from Phenol-Containing Wastewater using Clostridium Butyricum,” International Journal of Hydrogen Energy, 35, pp. 3345-3349. (SCI)

    56. Hwang, J. J., Zou, M. L., Chang, W. R., Su, A., Weng, F. B. and Wu, W., 2010, “Implementation of a Heat Recovery Unit in a Proton Exchange Membrane Fuel cell System,” International Journal of Hydrogen Energy, 35, pp. 8644-8653. (SCI)

    57. Hsiao, M. C., Liao, S. H., Yen, M. Y., Su, A., Wu, I. T., Hsiao, M. H. Lee, S. J., Teng, C. C. and Ma, C. C., 2010, “Effect of Graphite Sizes and Carbon Nanotubes Content on Flowability of Bulk Molding Compound and Formability of the Composite Bipolar Plate for Fuel Cell,” Journal of Power Sources, 195, pp. 5645-5650. (SCI)

    58. Hsu, J. P., Su, A., Mujumdar, A. S., Lee, D. J., 2010, “Unified Analysis of Dewatering and Drying of Sludge Cake,” Drying Technology, Vol. 28, Issue 7, pp. 877-880. (SCI)

    59. Hsu, J. P., Su, A., Mujumdar, A. S., Lee, D. J., 2010, “Model for Sludge Cake Drying Accounting for Developing Cracks,” Drying Technology, Vol. 28, Issue 7, pp. 922-926. (SCI)

    60. Min, Q., Duan, Y. Y., Wang, X. D., Liang, Z. P., Lee, D. J. and Su, A., 2010, “Spreading of Completely Wetting, Non-Newtonian Fluids with Non-Power-law Rheology,” Journal of Colloid and Interface Science, 348, pp. 250-254. (SCI)

    61. Yan, W. M., Wu, D. K., Wang, X. D., Ong, A. L., Lee, D. J. and Su, A., 2010, “Optimal Micro Porous Layer for Proton Exchange Membrane Fuel Cell,” Journal of Power Sources, 195, pp. 5731-5734. (SCI)

    62. Zhoufa. H., Shenlong, W., Mu, P., Eng, F. B. and Su, A., 2010, “The Effect of Micro-Porous layers on the Performance of Proton Exchange membrane Fuel Cells,” Proc. IMechE Vol. 224, Part A: J. Power and Energy, pp. 179-184. (SCI)

    63. Wang, X. D., Zhang, X. X., Yan, W. M., Lee, D. J. and Su, A., 2010, “Non-Isothermal Effects of a Single or Double Serpentine Proton Exchange Membrane Fuel Cells,” Electrochemica Acta, 55, pp.4926-2934. (SCI) 

    64. Su, A., Ferng, Y. M. and Shih, J. C., 2010, “CFD Investigating the Effects of Different Operating Conditions on the Performance and the Characteristics of a High-Temperature PEMFC,” Energy, 35, pp.16-27. (SCI)

    65. Wang, X. D., Huang, Y. X., Cheng, C. H., Jang, J. Y., Lee, D. J., Yan, W. M. and Su, A., 2010, “An Inverse Geometry Design Problem for Optimization of Single Serpentine Flow Field of PEM Fuel Cell,” International Journal of Hydrogen Energy, 35, pp.4247-4257. (SCI)

    66. Lee, C. Y., Su, A., Liu, Y. C., Chan, P. C. and Lin, C. H., 2010, “Sensor Fabrication Method for in Situ Temperature and Humidity Monitoring of Light Emitting Diodes,” Sensors, 10, pp.2263-3372. (SCI)

    67. Chi, P. H., Chan, S. H., Weng, F. B., Su, A., Sui, P. C. and Djilali, N., 2010, “On the Effect of Non-Uniform Property Distribution Due to Compression in the Gas Diffusion Layer of a PEMFC,” International Journal of Hydrogen Energy, Vol.35, Issue 7, pp. 2936-2948. (SCI)

    68. Liao, S. H., Weng, C. C., Yen, C. Y., Hsiao, M. C., Ma, C. C., Tsai, M. C., Su, A., Yen, M. Y.,  Lin, Y. F., Liu, P. L., 2010, “Preparation and Properties of Functionalized Multiwalled Carbon Nanotubes/Polypropylene Nanocomposite Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells,” Journal of Power Sources, 195, pp. 263-270. (SCI)

  • 國科會歷年執行計畫 

    計   畫   名   稱

    起迄年月

    補 助 機 構

    燃料電池與氫能關鍵技術產學聯盟合作計畫(二)(3/3)

    (MOST107-2622-8-155 -005 -TE5)

    107/02~108/01

    科技部

    燃料電池與氫能關鍵技術產學聯盟合作計畫(二)(2/3)

    (MOST106-2622-8-155 -002 -TE3)

    106/02~107/01

    科技部

    燃料電池與氫能關鍵技術產學聯盟合作計畫(二)(1/3)

    (MOST105-2622-8-155 -003 -TE3)

    105/02~106/01

    科技部

    即時產氫系統與轉子引擎整合應用於電動載台

    (MOST104-2221-E-155-038)

    104/08/-105/07

    科技部

    燃料電池與氫能關鍵技術產學技術聯盟合作計畫(3/3)
    (MOST 104-2622-E-155-004)

    104/02~105/01

    科技部

    燃料電池與氫能關鍵技術產學技術聯盟合作計畫(2/3)
    (NSC 103-2622-E-155-004)

    103/02~104/01

    科技部

    多元氫能動力系統研究
    (NSC 102-2221-E-155 -051)

    102/08~103/07

    科技部

    燃料電池與氫能關鍵技術產學技術聯盟合作計畫(1/3)
    (NSC 102-2622-E-155-003)

    102/02~103/01

    科技部

    高機動性產氫系統(II)

    (NSC101-2221-E-155-028)

    101/08~102/07

    國科會

    高機動性產氫系統

    (NSC100-2221-E-155-081)

    100/08~101/07

    國科會

    質子交換膜燃料電池堆模擬工具開發(二)

    (NSC 99-2221-E-155-062)

    99/08~100/07

    國科會

    利用固態氧化物燃料電池將核能電廠熱能轉換為氫能之儲能系統開發

    (NSC 98-3114-E-155-001)

    (NSC100-3113-E-155-001)

    (NSC101-3113-E-155-001)

    98/11~101/12

    國科會

    ALD於氣體擴散層製備晶粒<2nm觸媒應用於高效能燃料電池三年計畫

    (NSC 98-2120-M-155-001)

    (NSC 99-2120-M-155-001)

    (NSC 100-2120-M-155-001)

    98/08~101/07

    國科會

    質子交換膜燃料電池堆模擬工具開發

    (NSC 98-2221-E-155-054)

    98/08~99/07

    國科會

    個人移動載具之次世代能源系統關鍵技術開發三年計畫

    (NSC 97-3114-E-155-002)

    (NSC 98-2218-E-155-009)

    (NSC99-2218-E-155-001)

    97/08~101/05

    國科會

    燃料重組產氫微型化技術開發(II)

    (NSC 97-2221-E-155-055)

    97/08~98/07

    國科會

    應用微型溫濕度感測器檢測LED封裝品質之研究(II)

    (NSC 97-2221-E-155-068)

    97/08~98/07

    國科會

     ()其他計畫

    計畫名稱

    執行期限

    計畫編號

    99年度「跨領域綠色科技人才培育先導型計畫」發展特定主題綠色科技學程延續案-發展特定主題綠色科技學程

    990201~ 1000131

    (教育部)
Back to Top