實驗室

電腦整合技術實驗室

  • 地址:R3401
  • 電話:(03)463-8800 分機 2465 轉 3401
研究專長

腐蝕理論與技術、精密機械與量測、非傳統加工、逆向工程、燃料電池、CAD/CAM整合技術、鈑金成形

其他

國際期刊

  1. Chi-Yuan Lee, Jyun-Ting Lin, Chia-Hung Chen, Shuo-Jen Lee, Yu-Syuan Wang, “Development of a four-in-one sensor for low temperature fuel cell,”Renewable Energy, Vol. 135, pp. 1452-1465,2019. (SCI)
  2. Lee Shuo-Jen, Le-Hung-Toan Do, Lee Jeou Long, Chen Chang-Yong and Peng Huan-Chih, ” Effects of Pulsed Unipolar and Bipolar Current Regimes on the Characteristics of Micro-Arc Oxidation Coating on LZ91 Magnesium-Lithium Alloy”, International Journal of Electrochemical Science, Vol.13(3), pp2705-2717, 2018/02. (SCI)
  3. Vinh Ya, Esther Le Guillou, Yi-Ming Chen, Jui-Hsuan Yu, Kwang-Ho Choo, Sheng-Ming Chuang, Shou-Jen Lee and Chi-Wang Li, “Scrap iron packed in a Ti mesh cage as a sacrificial anode for electrochemical Cr(VI) reduction to treat electroplating wastewater,” Journal of the Taiwan Institute of Chemical Engineers, Vol.87, 91-97, 2018. (SCI, IF: 3.545, Rank 16 of 135 in electrochemistry)
  4. Sheng-Ming Chuang, Vinh Ya, Chiao-Lin Feng, Shou-Jen Lee, Kwang-Ho Choo and Chi-Wang Li, ”Electrochemical Cr(VI) reduction using a sacrificial Fe anode: Impacts of solution chemistry and stoichiometry,” Separation and Purification Technology, Volume 191, Pages 167-172, 2018/01. (SCI)
  5. Shuo-Jen Lee, Le-Hung-TOAN Do, Jeou-Long Lee and Huan-Chin Peng, “Process Design of Micro-Arc Oxidation Coatings Based on Magnesium Lithium Alloy and Their Characteristics,” International Journal of Electrochemical Science, Vol. 12, pp. 11256-11270, 2017/11.
  6. Chi-Yuan Lee*, Shuo-Jen Lee, Yi-Ming Hung, Chien-Te Hsieh, Yu-Ming Chang, Yen-Ting Huang and Jyun-Ting Lin, “Integrated microsensor for real-time microscopic monitoring of local temperature, voltage and current inside lithium ion battery, ” Sensors and Actuators A, Vol. 253, pp. 59-68, 2017/01. (SCI, IF:2.203, Rank 13 of 58 in instruments & instrumentation)
  7. Shuo-Jen Lee and Le Hung Toan Do, “Effects of copper additive on micro-arc oxidation coating of LZ91 magnesium-lithium alloy,” Surface & Coatings Technology, Vol. 307 (NA) pp. 781-789, 2016/10. (SCI)
  8. Shuo-Jen Lee, Do Le Hung Toan, Yi-Ho Chen and Huan-Chih Peng, “Performance Improvement of Phosphate Coating on Carbon Steel by Cathodic Electrochemical Method,” International Journal of Electrochemical Science, vol. 11 (3) pp. 2306-2316, 2016/02. (SCI)
  9. Chi-Yuan Lee*, Sheng-Ming Chuang, Shuo-Jen Lee and Chao-Yuan Chiu, “ Fabrication of flexible micro pH sensor for use in proton exchange membrane fuel cell, ” International Journal of Electrochemical Science, Vol. 11, pp. 2263-2268 (2016/02). (SCI)
  10. Chi-Yuan Lee, Fangbor Weng, Sheng-Ming Chuang, Shuo-Jen Lee, Yen-Pu Huang, Yen-Ting Cheng and Chih-Kai Cheng, “Flexible five-in-one micro sensor for in-situ diagnosis of high-temperature proton exchange membrane fuel cell stack,” International Journal of Hydrogen Energy, Vol. 40 (NA) pp. 15679-15689, 2015/12. (SCI, IF: 2.474, Rank 7 of 29 in electrochemistry)
  11. Shuo-Jen Lee, H.-C. Peng, Y.-S. Tsai, J.-C. Hung, C.S. Chiou and Y.- H. Chen, “Improving cylindricity and concentricity of hollow cylinder parts by electrochemical machining,” International Journal of Surface Science and Engineering, Vol. 9 (5) pp. 425-435, 2015/10. (SCI, IF: 0.478, Rank 115 of 130 in Engineering, Mechanical)
  12. Chi-Yuan Lee*, Sheng-Ming Chuang, Shuo-Jen Lee, I-Ming Hung, Chien-Te Hsieh, Yu-Ming Chang and Yen-Pu Huang, “ Flexible micro sensor for in-situ monitoring temperature and voltage of coin cells,” Sensors and Actuators A, Vol. 232, pp. 214-222, 2015/08. (SCI)
  13. Chi-Yuan Lee*, Huan-Chih Peng, Shuo-Jen Lee, I-Ming Hung, Chien-Te Hsieh, Chuan-Sheng Chiou, Yu-Ming Chang and Yen-Pu Huang, “A flexible three-in-one microsensor for real-time monitoring of internal temperature, voltage and current of lithium batteries,” Sensors, Vol. 15, pp. 11485-11498, 2015/05. (SCI, IF:1.570, Rank 12 of 56 in instruments & instrumentation). (SCI, IF:2.077, Rank 10 of 58 in instruments & instrumentation)
  14. Chi-Yuan Lee*, Huan-Chih Peng, Shuo-Jen Lee, Chuan-Sheng Chiou, Wei-Pin Lee and Chao-Hsuan Tsai, “Low pressure plasma voltage process for transformer coupling plasma dry etching,” International Journal of Electrochemical Science, Vol. 10, pp. 4732-4741, 2015/05. (SCI)
  15. Chi-Yuan Lee*, Shuo-Jen Lee, Yi-Man Lo and Yun-Min Liu, “Micro thermocouple and voltage sensor for fuel cell real time interior monitoring,” International Journal of Electrochemical Science, Vol. 9, pp. 272-281, 2014/01. (SCI)
  16. Shui-Yang Lien, Lee S.-J. and Asheesh Nautiyal, “Flexible Dye Sensitized Solar Cell Fabrication on Plastic, Transparent and Conductive Polydimethylsiloxane Substrate as Front Electrode and Stainless Steel as Counter Electrode,” Electrochemistry, Vol. 81 (11) pp. 896-899, 2013/11. (SCI, IF: 0.748, Rank 25 of 29 in electrochemistry)
  17. Shui-Yang Lien, Asheesh Nautiyal and Lee S.-J., “Optoelectronic Properties of Indium-Tin Oxide Films Deposited on Flexible and Transparent Poly(dimethylsiloxane) Substrate,” Japanese Journal of Applied Physics, Vol. 52 (11) pp. 115801-1 – 115801-4, 2013/11. (SCI, IF: 0.991, Rank 99 of 148 in physics)
  18. Wen-Cheng Ke, Shuo-Jen Lee, Shiow-Long Chen, Cheng-Hong Shih and Yu-Cheng Chang, “Influence of the molybdenum thickness on the conversion efficiency of thin-film a-Si:H solar cells grown on a 304 stainless steel substrate,” Surface & Coatings Technology, Vol. 231 (NA) pp. 285 – 288, 2013/09. (SCI)
  19. Shui-Yang Lien, Asheesh Nautiyal, Jia-He Jhu, Jen-Ken Hsu and Lee S.-J., “Surface Chemistry of Super-Hydrophilic SiO2-Doped TiO2 Photo-Catalysts for Self-Cleaning Glass,” Asian Journal of Chemistry, Vol. 25 (11) pp. 6071-6074, 2013/09. (SCI, IF: 0.180, Rank 135 of 148 in chemistry)
  20. Shuo-Jen Lee, Chi-Yuan Lee*, Kung-Ting Yang, Yu-Ming Lee, Yuan-Jhe Chang and Chen-Lin Ho, “The surface morphology effects of a metallic bipolar plate on the interfacial contact resistance of a proton exchange membrane fuel cell,” International Journal of Green Energy, Vol. 10, pp. 739-753, 2013/05. (SCI, IF: 1.060, Rank 59 of 92 in energy & fuel cells)
  21. Lee S.-J., Yi-Ho Chen, Chung Ping Liu and Tien Jung Fan, “Electrochemical Mechanical Polishing of Flexible Stainless Steel Substrate for Thin-Film Solar Cells,” International Journal of Electrochemical Science, Vol. 8 (5) pp. 6878-6888, 2013/05. (SCI)
  22. Lee S.-J., Yi-Ho Chen, Sung-Cheng Hu, Yi-Chung Lin, Cheng-Wei Chang, Tai-Lun Poon and Wen-Cheng Ke, “Improved performance of amorphous Si thin-film solar cells on 430 stainless steel substrate by an electrochemical mechanical polishing process,” Journal of Alloys and Compounds, Vol. 558 (NA) pp. 95 – 98, 2013/05. (SCI, IF: 2.554, Rank 66 of 275 in material science)
  23. Shui-Yang Lien, Lee S.-J., Asheesh Nantiyal and Yi-Ho Chen, “Dye-Sensitized Solar Cell (DSSC) Fabrication of Surface Treated (ECMP) Stainless Steel (SS430 AND SS304) as Counter Electrode,” Electrochemistry, Vol. 81 (4) pp. 251-254, 2013/04. (SCI)
  24. Shuo-Jen Lee, Chi-Yuan Lee*, Ming-Yu Chung, Yi-Ho Chen, Kuo-Chang Han, Chao-Kai Liu, Wen-Chih Yu and Yu-Ming Chang, “Lithium-ion battery module temperature monitoring by using planer home-made micro thermocouples,” International Journal of Electrochemical Science, Vol. 8, pp. 4131-4141, 2013/03. (SCI)
  25. Chi-Yuan Lee*, Shuo-Jen Lee, Kung-Ting Yang, Yu-Ming Lee, Ming-Shao Tang, Pei-Chi Chen and Yu-Ming Chang, “ An electrolyte soaking and thermal shock test of microtemperature and voltage sensors,” International Journal of Green Energy, Vol. 10, pp. 337-347, 2013/03. (SCI)
  26. Lee S.-J., Chung Ping Liu, Tien Jung Fan and Yi-Ho Chen, “Deburring Miniature Components by Electrochemical Method,” International Journal of Electrochemical Science, Vol. 8 (2) pp. 1713-1721, 2013/02. (SCI)
  27. Chi-Yuan Lee*, Shuo-Jen Lee, Yi-Ho Chen, Ming-Yu Chung, Kuo-Chang Han, Yu-Ming Chang and Ming-Shao Tang, “ In-situ monitoring of temperature and voltage in lithium-ion battery by embedded flexible micro temperature and voltage sensor,” International Journal of Electrochemical Science, Vol. 8, pp. 2968-2976, 2013/02. (SCI)
  28. Jung-Chou Hung; Chen-Hui Chang, Kuan-Chih Chiu and Lee S.-J., “Simulation-based fabrication of micro-helical grooves in a hydrodynamic thrust bearing by using ECMM,” International Journal of Advanced Manufacturing Technology, Vol. 64 (5-8) pp. 813-820, 2013/02. (SCI, IF: 1.367, Rank 20 of 44 in engineering)
  29. Chi-Yuan Lee*, Shuo-Jen Lee, Yen-Ting Cheng and Yu-Ming Chang, “ Micro pressure, temperature and flow sensors for integration in micro methanol reformer,” Applied Mechanics and Materials, Vol. 284-287, pp. 1872-1876, 2013/01. (EI)
  30. S.-J. Lee, Yi-Ho Chen and Jung-Chou Hung, “The Investigation of Surface Morphology Forming Mechanisms in Electropolishing Process,” International Journal of Electrochemical Science, Vol. 7 (12) pp. 12495-12506, 2012/12. (SCI)
  31. Wen-Cheng Ke, Shuo-Jen Lee, Shiow-Long Chen, Chia-Yu Kao, Wei-Chung Houng, Chih-An Wei and Yi-Ru Su, “Influence of the GaN spacer thickness on the structural and photoluminescence properties of multi-stack InN/GaN quantum dots,” Journal of Alloys and Compounds, Vol. 526 (NA) pp. 119-124, 2012/06. (SCI)
  32. Shui-Yang Lien; Yu-Cheng Chang; Yun-Shao Cho; Yin-Yu Chang and Lee S.-J., “Deposition and Characterization of High-Efficiency Silicon Thin-Film Solar Cells by HF-PECVD and OES Technology,” IEEE Transactions on Electron Devices, Vol. 59 (5) pp. 1245-1254, 2012/05. (SCI, IF: 2.128, Rank 77 of 262 in engineering)
  33. Wen-Cheng Ke, Shuo-Jen Lee, Shiow-Long Chen; Chia-Yu Kao and Wei-Chung Houng, “Effects of growth conditions on the acceptor activation of Mg-doped p-GaN,” Materials Chemistry and Physics, Vol. 133 (2-3) pp. 1029-1033, 2012/04. (SCI, IF: 1.984, Rank 119 of 275 in material science)
  34. Chi-Yuan Lee*, Shuo-Jen Lee, Ming-Shao Tang, Pei-Chi Chen and Yu-Ming Chang, “In situ monitoring of temperature using flexible micro temperature sensors inside polymer lithium-ion battery,” IEEE Xplore database, pp. 944-947, 2012/03. (EI)
  35. Chi-Yuan Lee*, Yu-Ming Lee and Shuo-Jen Lee, “ Local area water removal analysis of a proton exchange membrane fuel cell under gas purge conditions,” Sensors, Vol. 12, pp. 768-783, 2012/01. (SCI)
  36. Yang-Shih Lin, Shui-Yang Lien, Chao-Chun Wang, Chueh-Yang Liu, Asheesh Nautiyal, Dong-Sing Wuu, Pi-Chuen Tsai, Chia-Fu Chen and Shuo-Jen Lee, “Power effect of ZnO:Al film as back reflector on the performance of thin-film solar cells,” Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Volume 30, Issue 1, 2012/01. (SCI)
  37. S.-J. Lee, Y.-H. Chen, T.-L. Poon and Y.-C. Chang, “Micro-patterning on stainless steel 304 by Electro Chemical Machining method,” Advanced Science Letters, Volume 8, Pages 77-82, 2012. (EI)
  38. Chao-Chun Wang, Dong-Sing Wuu, Yang-Shih Lin, Shui-Yang Lien, Yung-Chuan Huang, Chueh-Yang Liu, Chia-Fu Chen, Asheesh Nautiyal and Shuo-Jen Lee, ”Properties of double-layered Ga-doped Al-zinc-oxide/titanium-doped indium–tin-oxide thin films prepared by dc magnetron sputtering applied for Si-based thin film solar cells,” Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Volume 29, Issue 6, 2011/11. (SCI)
  39. Lee S.-J., Chih-Yuan Lin, Shiow-Long Cheng, Wen-Cheng Ke, “High diffuse reflection of light using a textured 304BA stainless steel substrate,” Materials Chemistry and Physics, Vol. 130 (1-3) pp. 733-737, 2011/10. (SCI)
  40. Chi-Yuan Lee,Lee S.-J., Ming-Shao Tang and Pei-Chi Chen, “In Situ Monitoring of Temperature inside Lithium-Ion Batteries by Flexible Micro Temperature Sensors,” Sensors, Vol. 11 (10) pp. 9942-9950, 2011/10. (SCI)
  41. Dar-Yuan Chang, Bin-Chen Shen, Jung-Chou Hung, Lee S.-J. and Hai-Ping Tsui, “Process Simulation-Assisted Fabricating Micro-Herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining,” Materials and Manufacturing Processes, Vol. 26 (12) pp. 1451-1458, 2011/10. (SCI, IF: 1.515, Rank 107 of 275 in material science)
  42. Kuan-Ying Chen, Chia-Chieh Shen, Chi-Yuan Lee, Lee S.-J., Chih-Hsing Leu, Jung-Hui Wang and Chuin-Tih Yeh, “Coating powdered copper catalyst with yttria sol,” Materials Chemistry and Physics, Vol. 128 (1-2) pp. 57 – 61, 2011/07. (SCI)
  43. Chi-Yuan Lee, Lee S.-J., Chia-chieh Shen, Chuin-Tih Yeh, Chi-Chung Chang and Yi-Mna Lo, “Application of Flexible Micro Temperature Sensor in Oxidative Steam Reforming by A Methanol Micro Reformer,” Sensors, Vol. 11 (2) pp. 2246-2256, 2011/02. (SCI)
  44. Chi-Yuan Lee, Lee S.-J., Chia-Chieh Shen, Chuin-Tih Yeh, Chi-Chung Chang and Yu-Ming Chang, “In-situ Measurement of The Local Temperature Distributions for The Steam Reforming of A Methanol Micro Reformer by Using Flexible Micro Temperature Sensors,” International Journal of Hydrogen Energy (36) pp. 2869-2876, 2011/02. (SCI)
  45. Chi-Yuan Lee, Lee S.-J., Chien-Te Hsieh, Ming-Shao Tang, Jia-Yi Lin, Yi-Man Lo, Pei-Chi Chen, Dar-Yuan Chang and Juang R.-S., “In Situ Monitoring of Voltage and Temperature in Lithium Batteries,” IEEE Xplore database, Vol. 36 (4) pp. 243-246, 2011/02. (EI)
  46. Lin, Yang-Shin; Lien, Shui-Yang; Wang, Chao-Chun; Hsu, Chia-Hsun; Yang, Chih-Hsiang; Nautiyal, Asheesh; Wuu, Dong-Sing; Tsai, Pi-Chuen; Lee, Shuo-Jen, “Optimization of Recombination Layer in the Tunnel Junction of Amorphous Silicon Thin-Film Tandem Solar Cells,” International Journal of Photoenergy, No.264709, 2011. (SCI)
  47. Shu-Huang Liao, Min-Chien Hsiao, Chuan-Yu Yen, Chen-Chi M. Ma, Lee S.-J., Ay Su, Ming-Chi Tsai, Ming-Yu Yen and Po-Lan Liu, “Novel Functionalized Carbon Nanotubes as Cross-links Reinforced Vinyl Ester/Nanocomposite Bipolar Plates for Polymer Electrolyte Membrance Fuel Cells,” Journal of Power Sources, Vol. 195 (23) pp. 7808-7817, 2010/12. (SCI, IF: 5.612, Rank 2 of 29 in electrochemistry)
  48. Tse-Min Wen, Kung-Hsu Hou, Ching-Yuan Bai, Ming-Der Ger, Po-Hsiu Chien and Lee S.-J., “Corrosion Behaviour and Characteristics of Reforming Chromized Coatings on SS 420 Steel in The Simulated Environment of Proton Exchange Membrane Fuel Cells,” Corrosion Science, Vol. 52 (11) pp. 3599-3608, 2010/11.l. (SCI, IF: 3.852, Rank 37 of 275 in material science)
  49. W.C. Ke, Lee S.-J., C.Y. Kao, W.K. Chen, W.C. Chou, M.C. Lee, W.H. Chang, W.J. Lin, Y.C. Cheng, T.C. Lee and J.C. Lin, “Growth and optical properties of high-density InN nanodots,” Journal of Crystal Growth, Vol. 312 (NA) pp. 3209-3213, 2010/10. (SCI, IF: 1.497, Rank 146 of 275 in material science)
  50. Chi-Yuan Lee, Lee S.-J., Chia-Chieh Shen, Chi-Chung Chang, Chien-Heng Lin and Chuin-Tih Yeh, “Micro-sensors with Novel Micro-channels in A Micro-reformer,” International Journal of Hydrogen Energy, Vol. 35 (19) pp. 10630-10634, 2010/10. (SCI)
  51. Min-Chien Hsiao, Shu-Hang Liao, Ming-Yu Yen, Ay Su, I-Ting Wu, Min-Hsuan Hsiao, Lee S.-J., Chih-Chun Teng and Chen-Chi M., “Effect of Graphite Sizes and Carbon Nanotubes Content on Flowability of Bulk-molding Compound and Formability of The Composite Bipolar Plate for Fuel Cell,” Journal of Power Sources, Vol. 195 (17) pp. 5645-5650, 2010/09. (SCI)
  52. Ching-Yuan Bai, Tse-Min Wen, Mao-Suan Huang, Kung-Hsu Hou, Ming-Der Ger and Lee S.-J., “Surface Modification and Performance of Inexpensive Fe-based Bipolar Plates for Proton Exchange Membrane Fuel Cells,” Journal of Power Sources, Vol. 195 (17) pp. 5686 – 5691, 2010/09. (SCI)
  53. Lee S.-J., Kung-Ting Yang, Yu-Ming Lee and Chi-Yuan Lee, “The Resistive Properties of Proton Exchange Membrane Fuel Cells with Stainless Steel Bipolar Plates,” Journal of Fuel Cell Science and Technology, Vol. 7 (4) pp. 041004-0410045, 2010/08. (SCI, IF: 0.817, Rank 24 of 29 in electrochemistry)
  54. Yu-Ming Lee, Shuo-Jen Lee, Chi-Yuan Lee and Ping-Hung Lai, “Surface Treated SS304 Stainless Steel Bipolar Plates: Its Properties and Single Cell Performance,” Journal of Fuel Cell Science and Technology, Vol. 7 (3) pp. 310161-310166, 2010/06. (SCI)
  55. Min-Chien Hsiao, Shu-Hang Liao, Ming-Yu Yen, Chen-Chi M. Ma, Shuo-Jen Lee, Yung-Hung Chen, Chih-Hung Hung, Yu-Feng Lin and Xiao-Feng Xie,” Electrical and thermal conductivities of novel metal mesh hybrid polymer composite bipolar plates for proton exchange membrane fuel cells,” Journal of Power Sources, Volume 195, Issue 2, Pages 509-515, 2010/01. (SCI)
  56. Chi-Yuan Lee, Shuo-Jen Lee, Chia-chieh Shen, Wei-Mon Yan, Fangbor Weng, Guo-Bin Jung and Chien-Heng Lin, “Fabrication of flexible micro-sensors and flow field of stainless steel-based micro-reformer by micro-electro-mechanical-systems process,” Journal of Power Sources, 193, pp. 150-154, 2009/08. (SCI)
  57. Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Wen-Pin Shih, Wei-Yuan Fan and Chih-Wei Chuang, “Integration of silicon micro-hole arrays as a gas diffusion layer in a micro-fuel cell,” International journal of hydrogen energy, 34, pp. 6457-6464, 2009/08. (SCI)
  58. Yu-Ming Lee, Shuo-Jen Lee, Chi-Yuan Lee and Dar-Yuan Chang, “The Multiphysics Analysis of the Metallic Bipolar Plate by the Electrochemical Micro-machining Fabrication Process,” Journal of Power Sources, 193, pp. 227-237, 2009/08. (SCI)
  59. Shuo-Jen Lee, Shiow-Long Chen, Cheng-Wei Peng, Chih-Yuan Lin and Wen-Cheng Ke, “Enhanced diffuse reflection of light the air using silver coating on periodically textured 430BA stainless steel substrate,” Materials Chemistry and Physics, 118, pp. 219-222, 2009/11. (SCI)
  60. Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Wen-Pin Shih, Wei-Yuan Fan and Chih-Wei Chuang, “Real Time Monitoring of Temperature of a Micro Proton Exchange Membrane Fuel Cell,” Sensors, 9, pp.1423-1432, 2009/03. (SCI)
  61. Chi-Yuan Lee, Shuo-Jen Lee, Wen-Pin Shih, Chen-Hen Lin, Chi-Chung Chang and Pei-Zen Chang, “Fabrication of Micro Temperature Sensor and Heater in a Stainless Steel-based Micro Reformer,” IEEE Xplore Database, pp.168-171, 2009/01. (EI)
  62. Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Chen-Hen Lin, Yu-Ming Lee and Wei-Yuan Fan, “Integration of Micro Temperature Sensor and Metal Foil as Gas Diffusion Layer for Micro Fuel Cell,” IEEE Xplore Database, pp.164-167, 2009/01. (EI)
  63. Chi-Yuan Lee, Shuo-Jen Lee, Yu-Ming Lee and Kuan-Yu Chu, “Integration of Micro Flow Sensor and Flexible Substrate as GDL in Micro Fuel Cell,” IEEE Xplore Database, pp.632-635, 2009/01. (EI)
  64. Shuo-Jen Lee, Chi-Yuan Lee, Kung-Ting Yang, Feng-Hui Kuan and Ping-Hung Lai, “Simulation and Fabrication of Micro-scaled Flow Channels for Metallic Bipolar Plates by the Electrochemical Micro-machining Process,” Journal of Power Sources, 185, pp.1115-1121, 2008/12. (SCI)
  65. Shu-Hang Liao, Chuan-Yu Yen, Cheng-Chi Weng, Yu-Feng Lin, Ching-Hung Yang, Ming-Chi Tsai, Ming-Yu Yen, Min-Chien Hsiao, Shuo-Jen Lee, Xiao-Feng Xie and Yi-Hsiu Hsiao, “Preparation and Properties of Carbon Nanotube/Polypropylene Nanocomposite Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells,” Journal of Power Sources, 185, pp.1225-1232, 2008/12. (SCI)
  66. Ching-Yuan Bai, Yu-Hsien Chou, Chu-Lung Chao, Shuo-Jen Lee and Ming-Der Ger, “Surface Modifications of Aluminum Alloy 5052 for Bipolar Plates Using an Electroless Deposition Process,” Journal of Power Sources, 183, pp.174-181, 2008/08. (SCI)
  67. Chi-Yuan Lee, Shuo-Jen Lee, Dai, C.-L., Wu, C.-H and Wu, C.-H, “Monitoring of Temperature Distribution within a Silicon-based Micro Reformer Using Array Micro Sensors,” Key Engineering Materials, 364-366, pp.816-821, 2008/03. (EI)
  68. Chi-Yuan Lee, Shuo-Jen Lee, Dai, C.-L, Hsieh, C.-L and Lee, Y.-M, “Metal Bipolar Plate with Micro Sensors,” Key Engineering Materials, 364-366, pp.861-866, 2008/03. (EI)
  69. Chi-Yuan Lee, Shuo-Jen Lee and Wu, G.-W, “Integration of Micro Array Sensors in the MEA on Diagnosis of Micro Fuel Cells,” Key Engineering Materials, 364-366, pp.855-860, 2008/03. (EI)
  70. S.-T Ke, J.-L Lee, Y.-M Yen, Shuo-Jen Lee and M.-D Ger, “A Study of the Microstructure and Properties of Electroformed Ni-P Model Insert,” Key Engineering Material, 364-366, pp.232-236, 2008/03. (EI)
  71. Chi-Yuan Lee, Shuo-Jen Lee, C.-L. Dai, C.-H. Wu and M.-D Ger, “Integration of Micro Temperature Sensor and Heater in a Stainless Steel-based Micro Reformer,” Key Engineering Materials, 364-366, pp.843-848, 2008/03. (EI)
  72. Y.H. Chou, C.Y. Bai, M.D. Ger, Shuo-Jen Lee, Chi-Yuan Lee and C.L Chao, “Studies on Ni-Mo-P Coatings by Electroless Deposition,” Key Engineering Materials, 364-366, pp.333-339, 2008/03. (EI)
  73. Chi-Yuan Lee, Shuo-Jen Lee, Ching-Liang Dai and Chih-Wei Chuang, “Application of Porous Silicon on the Gas Diffusion Layer of Micro Fuel Cells,” Key Engineering Materials, 364-366, pp.849-854, 2008/03. (EI)
  74. Shuo-Jen Lee, Yu-Ming Lee, Chi-Yuan Lee, Jian-Jang Lai, K. T. Yang and Feng-Hui Kuan, “The Electrochemical Micro- fabrication Method for Micro-scale Flow Channels,” Key Engineering Materials, 364-366, pp.885-890, 2008/03. (EI)
  75. Shuo-Jen Lee, Jian-Jang Lai, Yu-Ming Lee, Chi-Yuan Lee, K.T. Yang and C.W. Peng, “Improving Machining Accuracy of the EMM Process Through Multi-physics Analysis,” Key Engineering Materials, 364-366, pp.891-896, 2008/03. (EI)
  76. S. J. Lee, Y. M. Lee, C. Y. Lee, J. J. Lai, K. T. Yang and F. H. Kuan, “The Electrochemical Micro-fabrication Method for Micro-scale Flow Channels,” Key Engineering Materials, Vols. 364-366 pp. 885-890, 2008. (EI)
  77. Shuo-Jen Lee, Yu-Ming Lee, Chi-Yuan Lee, Jian-Jang Lai, Feng-Hui Kuan and Chih-Wei Chuang, “The Performance of Miniature Metallic PEM Fuel Cells,” Journal of Power Sources, 171, pp.148-154, 2007/09. (SCI)
  78. Chi-Yuan Lee, Shuo-Jen Lee, Ren-De Huang and Chih-Wei Chuang, “Integration of the Micro Thermal Sensor and Porous Silicon as the Gas Diffusion Layer for Micro Fuel Cell,” IEEE Xplore database, pp. 1252-1255, 2007/08. (EI)
  79. Chi-Yuan Lee, Shuo-Jen Lee and Guan-Wei Wu, “Fabrication of Micro Temperature Sensor on the Flexible Substrate,” IEEE Xplore database, pp. 1050-1053, 2007/08. (EI)
  80. Shuo-Jen Lee and Dar-Yuan Chang, “A laser sensor with multiple detectors for freeform surface digitization,” International Journal of Advanced Manufacturing Technology, Vol.31(11-12), pp.1181-1190, 2007/02. (SCI)
  81. Shuo-Jen Lee and Dar-Yuan Chang, “A laser sensor with multiple detectors for freeform surface digitization,” International Journal of Advanced Manufacturing Technology, Vol.31(5-6), pp.474-482, 2006/12. (SCI)
  82. Shuo-Jen Lee, Yu-Ming Lee and Ming-Yu Chung, “Metal removal rate of the electrochemical mechanical polishing technology for stainless steel-the electrochemical characteristics,” Journal of Electronic Materials, Vol. 220, pp. 525-530, 2006/08. (SCI, IF: 1.270, Rank 162 of 275 in material science)
  83. Shuo-Jen Lee, Jian-Jang Lai and Dar-Yuan Chang, “Surface faults evaluation by optical imaging method for electropolishing process,” Third international Symposium on Precision Mechanical Measurements, Vol. 6280, pp. 628026-1-6, 2006/08. (EI)
  84. Chi-Yuan Lee, Shuo-Jen Lee and Ji-Lei Shieh, “Application of micro sensors on diagnosis of micro fuel cells,” IEEE Xplore database, pp. 434-437, 2007/01. (EI)
  85. Chi-Yuan Lee* , Pei-Zen Chang , Yung-Yu Chen , Ching-Liang Dai , Xuan-Yu Wang , Ping-Hei Chen and Shuo-Jen Lee, “Novel Method for In-Situ Monitoring of Thickness of Silicon Wafer during Wet Etching,” Sensors and Materials, Volume 18, Issue 2, Pages 071-082, 2006. (SCI)
  86. Shuo-Jen Lee, Ching-Han Huang, Yu-Pang Chen and Chen-Te Hsu, “PVD Coated Bipolar Plates for PEM Fuel Cells,” Journal of Fuel Cell Science and Technology, Volume 2, Issue 4, Pages 290-294, 2005/11. (SCI)
  87. Chi-Yuan Lee, Pei-Zen Chang, Yung-Yu Chen, Ching-Liang Dai, Ping-Hei Chen and Shuo-Jen Lee, “Novel Method for In Situ Monitoring of Thickness of Quartz during Wet Etching,” Japanese Journal of Applied Physics, Vol. 44, No. 10, pp. 7662–7666, 2005/10. (SCI)
  88. Shuo-Jen Lee, Jian-Jang Lai and Ching-Han Huang, “Stainless steel bipolar plates,” Journal of Power Sources, Volume 145, Issue 2, Pages 362-368, 2005/08. (SCI)
  89. Shuo-Jen Lee, Yu-Pang Chen and Ching-Han Huang, “Electroforming of metallic bipolar plates with micro-featured flow field,” Journal of Power Sources, Volume 145, Issue 2, Pages 369-375, 2005/08. (SCI)
  90. Shuo-Jen Lee, Chen-De Hsu and Ching-Han Huang, “Analyses of the fuel cell stack assembly pressure,” Journal of Power Sources, Volume 145, Issue 2, Pages 353-361, 2005/08. (SCI)
  91. Shuo-Jen Lee, Ching-Han Huang, Yu-Pang Chen and Yen-Ming Chen, “Chemical Treatment Method for the Aluminum Bipolar Plates of PEM Fuel Cells,” Journal of Fuel Cell Science and Technology, Volume 2, Issue 3, Pages 208-212, 2005/08. (EI)
  92. Shuo-Jen Lee, Ching-Han Huang, Jian-Jang Lai and Yu-Pang Chen, “Corrosion-resistant component for PEM fuel cells,” Journal of Power Sources, Volume 131, Issue 1-2 , Pages 162-168, 2004/05. (SCI)
  93. Shuo-Jen Lee and Jian-Jang Lai, “The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel,” Journal of Materials Processing Technology, Volume 140, Issues 1-3, Pages 206-210, 2003/12. (SCI)
  94. Yuan-Long Chen, Shu-Min Zhu, Shuo-Jen Lee, Jong C Wang, “The technology combined electrochemical mechanical polishing,” Journal of Materials Processing Technology, Volume 140, Issues 1–3, Pages 203-205, 2003/09. (SCI)
  95. Shuo-Jen Lee, Yu-Ming Lee, Ming-Feng Du, “The polishing mechanism of electrochemical mechanical polishing technology,” Journal of Materials Processing Technology, Volume 140, Issues 1–3, Pages 280-286, 2003/09. (SCI).
  96. Shuo-Jen Lee, Ching-Han Huang, Yu-Pang Chen, “Investigation of PVD coating on corrosion resistance of metallic bipolar plates in PEM fuel cell,” Journal of Materials Processing Technology, Volume 140, Issues 1–3, Pages 688-693, 2003/09. (SCI)
  97. Shuo-Jen Lee and Fang-Bor Weng, “Recent R&D and future prospects of fuel cell technology in Taiwan,” Fuel Cells Bulletin, Volume 2002, Issue 2, Pages 8-11, 2002/02. (EI)
  98. Lee Shuo-Jen and Fan TienJung, “Calibration method of parallel projection beams for 3D profile measurement,” Proceedings of SPIE - The International Society for Optical Engineering, Volume 2899, Pages 695-701, 1996. (EI)
  99. Shou-Jen Lee, Henzer Chen, “Design optimization with back-propagation neural networks,” Journal of Intelligent Manufacturing, Volume 2, Issue 5, pp 293-303, 1991/10. (SCI)
  100. V. Kumar, S.-J. Lee, M. D. German, “Finite element design sensitivity analysis and its integration with numerical optimization techniques for structural design,” Computers & Structures, Volume 32, Issues 3-4, Pages 883-897, 1989. (SCI)
  101. S.J. Lee, S. G. Kapoor, “On the automatic ion of reanalysis techniques in machine tool structural element optimization,” Engineering Optimization, Volume 10, Issue 3, pages 163-181, 1986. (SCI)
  102. S.J. Lee, S. G. Kapoor, “A shape and size optimization algorithm for machine tool element design,” Engineering Optimization, Volume 10, Issue 1, Pages 25-39, 1986. (SCI)
  103. S.J. Lee, S. G. Kapoor, “Cutting Process Dynamics Simulation for Machine Tool Structure Design,” Journal of Engineering for Industry, Volume 108, Issues 2, Pages 68-74, 1986. (EI)
  104. S.J. Lee, S. G. Kapoor, R. E. DeVor, “An Integrated Machining Process Design Simulator for the Optimal Design of Face Milling Systems,” Journal of Engineering for Industry, Volume 107, Issue 4, Pages 301-308, 1985. (EI)
  • 李碩仁,黃仲成,高崇洋,”吊籠穩固裝置改良設計雛形製作與測試”,勞工安全衛生研究季刊,第十二卷第三期,第223-238頁,民國九十三年九月。

  • 李碩仁,林克峰,戴基福,高崇洋,”車輛系油壓煞車系統含水量預警裝置之研發”,勞工安全衛生研究季刊,第十二卷第二期,第137-145頁,民國九十三年六月。

  • 李碩仁,林克峰,戴基福,高崇洋,”車輛系油壓煞車系統失效溫度預警裝置之研發”,勞工安全衛生研究季刊,第十二卷第一期,第11-22頁,民國九十三年三月。

  • 李碩仁,黃智豪,黃仲成,戴基福,高崇洋,王書隆,” 吊籠作業中安全穩固裝置吸盤式設計”,勞工安全衛生研究季刊,第十一卷第二期,第137-151頁,民國九十二年六月。

Back to Top