國際期刊
Chi-Yuan Lee, Jyun-Ting Lin, Chia-Hung Chen, Shuo-Jen Lee, Yu-Syuan Wang, “Development of a four-in-one sensor for low temperature fuel cell,”Renewable Energy, Vol. 135, pp. 1452-1465,2019. (SCI)
Lee Shuo-Jen, Le-Hung-Toan Do, Lee Jeou Long, Chen Chang-Yong and Peng Huan-Chih, ” Effects of Pulsed Unipolar and Bipolar Current Regimes on the Characteristics of Micro-Arc Oxidation Coating on LZ91 Magnesium-Lithium Alloy”, International Journal of Electrochemical Science, Vol.13(3), pp2705-2717, 2018/02. (SCI)
Vinh Ya, Esther Le Guillou, Yi-Ming Chen, Jui-Hsuan Yu, Kwang-Ho Choo, Sheng-Ming Chuang, Shou-Jen Lee and Chi-Wang Li, “Scrap iron packed in a Ti mesh cage as a sacrificial anode for electrochemical Cr(VI) reduction to treat electroplating wastewater,” Journal of the Taiwan Institute of Chemical Engineers, Vol.87, 91-97, 2018. (SCI, IF: 3.545, Rank 16 of 135 in electrochemistry)
Sheng-Ming Chuang, Vinh Ya, Chiao-Lin Feng, Shou-Jen Lee, Kwang-Ho Choo and Chi-Wang Li, ”Electrochemical Cr(VI) reduction using a sacrificial Fe anode: Impacts of solution chemistry and stoichiometry,” Separation and Purification Technology, Volume 191, Pages 167-172, 2018/01. (SCI)
Shuo-Jen Lee, Le-Hung-TOAN Do, Jeou-Long Lee and Huan-Chin Peng, “Process Design of Micro-Arc Oxidation Coatings Based on Magnesium Lithium Alloy and Their Characteristics,” International Journal of Electrochemical Science, Vol. 12, pp. 11256-11270, 2017/11.
Chi-Yuan Lee*, Shuo-Jen Lee, Yi-Ming Hung, Chien-Te Hsieh, Yu-Ming Chang, Yen-Ting Huang and Jyun-Ting Lin, “Integrated microsensor for real-time microscopic monitoring of local temperature, voltage and current inside lithium ion battery, ” Sensors and Actuators A, Vol. 253, pp. 59-68, 2017/01. (SCI, IF:2.203, Rank 13 of 58 in instruments & instrumentation)
Shuo-Jen Lee and Le Hung Toan Do, “Effects of copper additive on micro-arc oxidation coating of LZ91 magnesium-lithium alloy,” Surface & Coatings Technology, Vol. 307 (NA) pp. 781-789, 2016/10. (SCI)
Shuo-Jen Lee, Do Le Hung Toan, Yi-Ho Chen and Huan-Chih Peng, “Performance Improvement of Phosphate Coating on Carbon Steel by Cathodic Electrochemical Method,” International Journal of Electrochemical Science, vol. 11 (3) pp. 2306-2316, 2016/02. (SCI)
Chi-Yuan Lee*, Sheng-Ming Chuang, Shuo-Jen Lee and Chao-Yuan Chiu, “ Fabrication of flexible micro pH sensor for use in proton exchange membrane fuel cell, ” International Journal of Electrochemical Science, Vol. 11, pp. 2263-2268 (2016/02). (SCI)
Chi-Yuan Lee, Fangbor Weng, Sheng-Ming Chuang, Shuo-Jen Lee, Yen-Pu Huang, Yen-Ting Cheng and Chih-Kai Cheng, “Flexible five-in-one micro sensor for in-situ diagnosis of high-temperature proton exchange membrane fuel cell stack,” International Journal of Hydrogen Energy, Vol. 40 (NA) pp. 15679-15689, 2015/12. (SCI, IF: 2.474, Rank 7 of 29 in electrochemistry)
Shuo-Jen Lee, H.-C. Peng, Y.-S. Tsai, J.-C. Hung, C.S. Chiou and Y.- H. Chen, “Improving cylindricity and concentricity of hollow cylinder parts by electrochemical machining,” International Journal of Surface Science and Engineering, Vol. 9 (5) pp. 425-435, 2015/10. (SCI, IF: 0.478, Rank 115 of 130 in Engineering, Mechanical)
Chi-Yuan Lee*, Sheng-Ming Chuang, Shuo-Jen Lee, I-Ming Hung, Chien-Te Hsieh, Yu-Ming Chang and Yen-Pu Huang, “ Flexible micro sensor for in-situ monitoring temperature and voltage of coin cells,” Sensors and Actuators A, Vol. 232, pp. 214-222, 2015/08. (SCI)
Chi-Yuan Lee*, Huan-Chih Peng, Shuo-Jen Lee, I-Ming Hung, Chien-Te Hsieh, Chuan-Sheng Chiou, Yu-Ming Chang and Yen-Pu Huang, “A flexible three-in-one microsensor for real-time monitoring of internal temperature, voltage and current of lithium batteries,” Sensors, Vol. 15, pp. 11485-11498, 2015/05. (SCI, IF:1.570, Rank 12 of 56 in instruments & instrumentation). (SCI, IF:2.077, Rank 10 of 58 in instruments & instrumentation)
Chi-Yuan Lee*, Huan-Chih Peng, Shuo-Jen Lee, Chuan-Sheng Chiou, Wei-Pin Lee and Chao-Hsuan Tsai, “Low pressure plasma voltage process for transformer coupling plasma dry etching,” International Journal of Electrochemical Science, Vol. 10, pp. 4732-4741, 2015/05. (SCI)
Chi-Yuan Lee*, Shuo-Jen Lee, Yi-Man Lo and Yun-Min Liu, “Micro thermocouple and voltage sensor for fuel cell real time interior monitoring,” International Journal of Electrochemical Science, Vol. 9, pp. 272-281, 2014/01. (SCI)
Shui-Yang Lien, Lee S.-J. and Asheesh Nautiyal, “Flexible Dye Sensitized Solar Cell Fabrication on Plastic, Transparent and Conductive Polydimethylsiloxane Substrate as Front Electrode and Stainless Steel as Counter Electrode,” Electrochemistry, Vol. 81 (11) pp. 896-899, 2013/11. (SCI, IF: 0.748, Rank 25 of 29 in electrochemistry)
Shui-Yang Lien, Asheesh Nautiyal and Lee S.-J., “Optoelectronic Properties of Indium-Tin Oxide Films Deposited on Flexible and Transparent Poly(dimethylsiloxane) Substrate,” Japanese Journal of Applied Physics, Vol. 52 (11) pp. 115801-1 – 115801-4, 2013/11. (SCI, IF: 0.991, Rank 99 of 148 in physics)
Wen-Cheng Ke, Shuo-Jen Lee, Shiow-Long Chen, Cheng-Hong Shih and Yu-Cheng Chang, “Influence of the molybdenum thickness on the conversion efficiency of thin-film a-Si:H solar cells grown on a 304 stainless steel substrate,” Surface & Coatings Technology, Vol. 231 (NA) pp. 285 – 288, 2013/09. (SCI)
Shui-Yang Lien, Asheesh Nautiyal, Jia-He Jhu, Jen-Ken Hsu and Lee S.-J., “Surface Chemistry of Super-Hydrophilic SiO2-Doped TiO2 Photo-Catalysts for Self-Cleaning Glass,” Asian Journal of Chemistry, Vol. 25 (11) pp. 6071-6074, 2013/09. (SCI, IF: 0.180, Rank 135 of 148 in chemistry)
Shuo-Jen Lee, Chi-Yuan Lee*, Kung-Ting Yang, Yu-Ming Lee, Yuan-Jhe Chang and Chen-Lin Ho, “The surface morphology effects of a metallic bipolar plate on the interfacial contact resistance of a proton exchange membrane fuel cell,” International Journal of Green Energy, Vol. 10, pp. 739-753, 2013/05. (SCI, IF: 1.060, Rank 59 of 92 in energy & fuel cells)
Lee S.-J., Yi-Ho Chen, Chung Ping Liu and Tien Jung Fan, “Electrochemical Mechanical Polishing of Flexible Stainless Steel Substrate for Thin-Film Solar Cells,” International Journal of Electrochemical Science, Vol. 8 (5) pp. 6878-6888, 2013/05. (SCI)
Lee S.-J., Yi-Ho Chen, Sung-Cheng Hu, Yi-Chung Lin, Cheng-Wei Chang, Tai-Lun Poon and Wen-Cheng Ke, “Improved performance of amorphous Si thin-film solar cells on 430 stainless steel substrate by an electrochemical mechanical polishing process,” Journal of Alloys and Compounds, Vol. 558 (NA) pp. 95 – 98, 2013/05. (SCI, IF: 2.554, Rank 66 of 275 in material science)
Shui-Yang Lien, Lee S.-J., Asheesh Nantiyal and Yi-Ho Chen, “Dye-Sensitized Solar Cell (DSSC) Fabrication of Surface Treated (ECMP) Stainless Steel (SS430 AND SS304) as Counter Electrode,” Electrochemistry, Vol. 81 (4) pp. 251-254, 2013/04. (SCI)
Shuo-Jen Lee, Chi-Yuan Lee*, Ming-Yu Chung, Yi-Ho Chen, Kuo-Chang Han, Chao-Kai Liu, Wen-Chih Yu and Yu-Ming Chang, “Lithium-ion battery module temperature monitoring by using planer home-made micro thermocouples,” International Journal of Electrochemical Science, Vol. 8, pp. 4131-4141, 2013/03. (SCI)
Chi-Yuan Lee*, Shuo-Jen Lee, Kung-Ting Yang, Yu-Ming Lee, Ming-Shao Tang, Pei-Chi Chen and Yu-Ming Chang, “ An electrolyte soaking and thermal shock test of microtemperature and voltage sensors,” International Journal of Green Energy, Vol. 10, pp. 337-347, 2013/03. (SCI)
Lee S.-J., Chung Ping Liu, Tien Jung Fan and Yi-Ho Chen, “Deburring Miniature Components by Electrochemical Method,” International Journal of Electrochemical Science, Vol. 8 (2) pp. 1713-1721, 2013/02. (SCI)
Chi-Yuan Lee*, Shuo-Jen Lee, Yi-Ho Chen, Ming-Yu Chung, Kuo-Chang Han, Yu-Ming Chang and Ming-Shao Tang, “ In-situ monitoring of temperature and voltage in lithium-ion battery by embedded flexible micro temperature and voltage sensor,” International Journal of Electrochemical Science, Vol. 8, pp. 2968-2976, 2013/02. (SCI)
Jung-Chou Hung; Chen-Hui Chang, Kuan-Chih Chiu and Lee S.-J., “Simulation-based fabrication of micro-helical grooves in a hydrodynamic thrust bearing by using ECMM,” International Journal of Advanced Manufacturing Technology, Vol. 64 (5-8) pp. 813-820, 2013/02. (SCI, IF: 1.367, Rank 20 of 44 in engineering)
Chi-Yuan Lee*, Shuo-Jen Lee, Yen-Ting Cheng and Yu-Ming Chang, “ Micro pressure, temperature and flow sensors for integration in micro methanol reformer,” Applied Mechanics and Materials, Vol. 284-287, pp. 1872-1876, 2013/01. (EI)
S.-J. Lee, Yi-Ho Chen and Jung-Chou Hung, “The Investigation of Surface Morphology Forming Mechanisms in Electropolishing Process,” International Journal of Electrochemical Science, Vol. 7 (12) pp. 12495-12506, 2012/12. (SCI)
Wen-Cheng Ke, Shuo-Jen Lee, Shiow-Long Chen, Chia-Yu Kao, Wei-Chung Houng, Chih-An Wei and Yi-Ru Su, “Influence of the GaN spacer thickness on the structural and photoluminescence properties of multi-stack InN/GaN quantum dots,” Journal of Alloys and Compounds, Vol. 526 (NA) pp. 119-124, 2012/06. (SCI)
Shui-Yang Lien; Yu-Cheng Chang; Yun-Shao Cho; Yin-Yu Chang and Lee S.-J., “Deposition and Characterization of High-Efficiency Silicon Thin-Film Solar Cells by HF-PECVD and OES Technology,” IEEE Transactions on Electron Devices, Vol. 59 (5) pp. 1245-1254, 2012/05. (SCI, IF: 2.128, Rank 77 of 262 in engineering)
Wen-Cheng Ke, Shuo-Jen Lee, Shiow-Long Chen; Chia-Yu Kao and Wei-Chung Houng, “Effects of growth conditions on the acceptor activation of Mg-doped p-GaN,” Materials Chemistry and Physics, Vol. 133 (2-3) pp. 1029-1033, 2012/04. (SCI, IF: 1.984, Rank 119 of 275 in material science)
Chi-Yuan Lee*, Shuo-Jen Lee, Ming-Shao Tang, Pei-Chi Chen and Yu-Ming Chang, “In situ monitoring of temperature using flexible micro temperature sensors inside polymer lithium-ion battery,” IEEE Xplore database, pp. 944-947, 2012/03. (EI)
Chi-Yuan Lee*, Yu-Ming Lee and Shuo-Jen Lee, “ Local area water removal analysis of a proton exchange membrane fuel cell under gas purge conditions,” Sensors, Vol. 12, pp. 768-783, 2012/01. (SCI)
Yang-Shih Lin, Shui-Yang Lien, Chao-Chun Wang, Chueh-Yang Liu, Asheesh Nautiyal, Dong-Sing Wuu, Pi-Chuen Tsai, Chia-Fu Chen and Shuo-Jen Lee, “Power effect of ZnO:Al film as back reflector on the performance of thin-film solar cells,” Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Volume 30, Issue 1, 2012/01. (SCI)
S.-J. Lee, Y.-H. Chen, T.-L. Poon and Y.-C. Chang, “Micro-patterning on stainless steel 304 by Electro Chemical Machining method,” Advanced Science Letters, Volume 8, Pages 77-82, 2012. (EI)
Chao-Chun Wang, Dong-Sing Wuu, Yang-Shih Lin, Shui-Yang Lien, Yung-Chuan Huang, Chueh-Yang Liu, Chia-Fu Chen, Asheesh Nautiyal and Shuo-Jen Lee, ”Properties of double-layered Ga-doped Al-zinc-oxide/titanium-doped indium–tin-oxide thin films prepared by dc magnetron sputtering applied for Si-based thin film solar cells,” Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Volume 29, Issue 6, 2011/11. (SCI)
Lee S.-J., Chih-Yuan Lin, Shiow-Long Cheng, Wen-Cheng Ke, “High diffuse reflection of light using a textured 304BA stainless steel substrate,” Materials Chemistry and Physics, Vol. 130 (1-3) pp. 733-737, 2011/10. (SCI)
Chi-Yuan Lee,Lee S.-J., Ming-Shao Tang and Pei-Chi Chen, “In Situ Monitoring of Temperature inside Lithium-Ion Batteries by Flexible Micro Temperature Sensors,” Sensors, Vol. 11 (10) pp. 9942-9950, 2011/10. (SCI)
Dar-Yuan Chang, Bin-Chen Shen, Jung-Chou Hung, Lee S.-J. and Hai-Ping Tsui, “Process Simulation-Assisted Fabricating Micro-Herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining,” Materials and Manufacturing Processes, Vol. 26 (12) pp. 1451-1458, 2011/10. (SCI, IF: 1.515, Rank 107 of 275 in material science)
Kuan-Ying Chen, Chia-Chieh Shen, Chi-Yuan Lee, Lee S.-J., Chih-Hsing Leu, Jung-Hui Wang and Chuin-Tih Yeh, “Coating powdered copper catalyst with yttria sol,” Materials Chemistry and Physics, Vol. 128 (1-2) pp. 57 – 61, 2011/07. (SCI)
Chi-Yuan Lee, Lee S.-J., Chia-chieh Shen, Chuin-Tih Yeh, Chi-Chung Chang and Yi-Mna Lo, “Application of Flexible Micro Temperature Sensor in Oxidative Steam Reforming by A Methanol Micro Reformer,” Sensors, Vol. 11 (2) pp. 2246-2256, 2011/02. (SCI)
Chi-Yuan Lee, Lee S.-J., Chia-Chieh Shen, Chuin-Tih Yeh, Chi-Chung Chang and Yu-Ming Chang, “In-situ Measurement of The Local Temperature Distributions for The Steam Reforming of A Methanol Micro Reformer by Using Flexible Micro Temperature Sensors,” International Journal of Hydrogen Energy (36) pp. 2869-2876, 2011/02. (SCI)
Chi-Yuan Lee, Lee S.-J., Chien-Te Hsieh, Ming-Shao Tang, Jia-Yi Lin, Yi-Man Lo, Pei-Chi Chen, Dar-Yuan Chang and Juang R.-S., “In Situ Monitoring of Voltage and Temperature in Lithium Batteries,” IEEE Xplore database, Vol. 36 (4) pp. 243-246, 2011/02. (EI)
Lin, Yang-Shin; Lien, Shui-Yang; Wang, Chao-Chun; Hsu, Chia-Hsun; Yang, Chih-Hsiang; Nautiyal, Asheesh; Wuu, Dong-Sing; Tsai, Pi-Chuen; Lee, Shuo-Jen, “Optimization of Recombination Layer in the Tunnel Junction of Amorphous Silicon Thin-Film Tandem Solar Cells,” International Journal of Photoenergy, No.264709, 2011. (SCI)
Shu-Huang Liao, Min-Chien Hsiao, Chuan-Yu Yen, Chen-Chi M. Ma, Lee S.-J., Ay Su, Ming-Chi Tsai, Ming-Yu Yen and Po-Lan Liu, “Novel Functionalized Carbon Nanotubes as Cross-links Reinforced Vinyl Ester/Nanocomposite Bipolar Plates for Polymer Electrolyte Membrance Fuel Cells,” Journal of Power Sources, Vol. 195 (23) pp. 7808-7817, 2010/12. (SCI, IF: 5.612, Rank 2 of 29 in electrochemistry)
Tse-Min Wen, Kung-Hsu Hou, Ching-Yuan Bai, Ming-Der Ger, Po-Hsiu Chien and Lee S.-J., “Corrosion Behaviour and Characteristics of Reforming Chromized Coatings on SS 420 Steel in The Simulated Environment of Proton Exchange Membrane Fuel Cells,” Corrosion Science, Vol. 52 (11) pp. 3599-3608, 2010/11.l. (SCI, IF: 3.852, Rank 37 of 275 in material science)
W.C. Ke, Lee S.-J., C.Y. Kao, W.K. Chen, W.C. Chou, M.C. Lee, W.H. Chang, W.J. Lin, Y.C. Cheng, T.C. Lee and J.C. Lin, “Growth and optical properties of high-density InN nanodots,” Journal of Crystal Growth, Vol. 312 (NA) pp. 3209-3213, 2010/10. (SCI, IF: 1.497, Rank 146 of 275 in material science)
Chi-Yuan Lee, Lee S.-J., Chia-Chieh Shen, Chi-Chung Chang, Chien-Heng Lin and Chuin-Tih Yeh, “Micro-sensors with Novel Micro-channels in A Micro-reformer,” International Journal of Hydrogen Energy, Vol. 35 (19) pp. 10630-10634, 2010/10. (SCI)
Min-Chien Hsiao, Shu-Hang Liao, Ming-Yu Yen, Ay Su, I-Ting Wu, Min-Hsuan Hsiao, Lee S.-J., Chih-Chun Teng and Chen-Chi M., “Effect of Graphite Sizes and Carbon Nanotubes Content on Flowability of Bulk-molding Compound and Formability of The Composite Bipolar Plate for Fuel Cell,” Journal of Power Sources, Vol. 195 (17) pp. 5645-5650, 2010/09. (SCI)
Ching-Yuan Bai, Tse-Min Wen, Mao-Suan Huang, Kung-Hsu Hou, Ming-Der Ger and Lee S.-J., “Surface Modification and Performance of Inexpensive Fe-based Bipolar Plates for Proton Exchange Membrane Fuel Cells,” Journal of Power Sources, Vol. 195 (17) pp. 5686 – 5691, 2010/09. (SCI)
Lee S.-J., Kung-Ting Yang, Yu-Ming Lee and Chi-Yuan Lee, “The Resistive Properties of Proton Exchange Membrane Fuel Cells with Stainless Steel Bipolar Plates,” Journal of Fuel Cell Science and Technology, Vol. 7 (4) pp. 041004-0410045, 2010/08. (SCI, IF: 0.817, Rank 24 of 29 in electrochemistry)
Yu-Ming Lee, Shuo-Jen Lee, Chi-Yuan Lee and Ping-Hung Lai, “Surface Treated SS304 Stainless Steel Bipolar Plates: Its Properties and Single Cell Performance,” Journal of Fuel Cell Science and Technology, Vol. 7 (3) pp. 310161-310166, 2010/06. (SCI)
Min-Chien Hsiao, Shu-Hang Liao, Ming-Yu Yen, Chen-Chi M. Ma, Shuo-Jen Lee, Yung-Hung Chen, Chih-Hung Hung, Yu-Feng Lin and Xiao-Feng Xie,” Electrical and thermal conductivities of novel metal mesh hybrid polymer composite bipolar plates for proton exchange membrane fuel cells,” Journal of Power Sources, Volume 195, Issue 2, Pages 509-515, 2010/01. (SCI)
Chi-Yuan Lee, Shuo-Jen Lee, Chia-chieh Shen, Wei-Mon Yan, Fangbor Weng, Guo-Bin Jung and Chien-Heng Lin, “Fabrication of flexible micro-sensors and flow field of stainless steel-based micro-reformer by micro-electro-mechanical-systems process,” Journal of Power Sources, 193, pp. 150-154, 2009/08. (SCI)
Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Wen-Pin Shih, Wei-Yuan Fan and Chih-Wei Chuang, “Integration of silicon micro-hole arrays as a gas diffusion layer in a micro-fuel cell,” International journal of hydrogen energy, 34, pp. 6457-6464, 2009/08. (SCI)
Yu-Ming Lee, Shuo-Jen Lee, Chi-Yuan Lee and Dar-Yuan Chang, “The Multiphysics Analysis of the Metallic Bipolar Plate by the Electrochemical Micro-machining Fabrication Process,” Journal of Power Sources, 193, pp. 227-237, 2009/08. (SCI)
Shuo-Jen Lee, Shiow-Long Chen, Cheng-Wei Peng, Chih-Yuan Lin and Wen-Cheng Ke, “Enhanced diffuse reflection of light the air using silver coating on periodically textured 430BA stainless steel substrate,” Materials Chemistry and Physics, 118, pp. 219-222, 2009/11. (SCI)
Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Wen-Pin Shih, Wei-Yuan Fan and Chih-Wei Chuang, “Real Time Monitoring of Temperature of a Micro Proton Exchange Membrane Fuel Cell,” Sensors, 9, pp.1423-1432, 2009/03. (SCI)
Chi-Yuan Lee, Shuo-Jen Lee, Wen-Pin Shih, Chen-Hen Lin, Chi-Chung Chang and Pei-Zen Chang, “Fabrication of Micro Temperature Sensor and Heater in a Stainless Steel-based Micro Reformer,” IEEE Xplore Database, pp.168-171, 2009/01. (EI)
Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Chen-Hen Lin, Yu-Ming Lee and Wei-Yuan Fan, “Integration of Micro Temperature Sensor and Metal Foil as Gas Diffusion Layer for Micro Fuel Cell,” IEEE Xplore Database, pp.164-167, 2009/01. (EI)
Chi-Yuan Lee, Shuo-Jen Lee, Yu-Ming Lee and Kuan-Yu Chu, “Integration of Micro Flow Sensor and Flexible Substrate as GDL in Micro Fuel Cell,” IEEE Xplore Database, pp.632-635, 2009/01. (EI)
Shuo-Jen Lee, Chi-Yuan Lee, Kung-Ting Yang, Feng-Hui Kuan and Ping-Hung Lai, “Simulation and Fabrication of Micro-scaled Flow Channels for Metallic Bipolar Plates by the Electrochemical Micro-machining Process,” Journal of Power Sources, 185, pp.1115-1121, 2008/12. (SCI)
Shu-Hang Liao, Chuan-Yu Yen, Cheng-Chi Weng, Yu-Feng Lin, Ching-Hung Yang, Ming-Chi Tsai, Ming-Yu Yen, Min-Chien Hsiao, Shuo-Jen Lee, Xiao-Feng Xie and Yi-Hsiu Hsiao, “Preparation and Properties of Carbon Nanotube/Polypropylene Nanocomposite Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells,” Journal of Power Sources, 185, pp.1225-1232, 2008/12. (SCI)
Ching-Yuan Bai, Yu-Hsien Chou, Chu-Lung Chao, Shuo-Jen Lee and Ming-Der Ger, “Surface Modifications of Aluminum Alloy 5052 for Bipolar Plates Using an Electroless Deposition Process,” Journal of Power Sources, 183, pp.174-181, 2008/08. (SCI)
Chi-Yuan Lee, Shuo-Jen Lee, Dai, C.-L., Wu, C.-H and Wu, C.-H, “Monitoring of Temperature Distribution within a Silicon-based Micro Reformer Using Array Micro Sensors,” Key Engineering Materials, 364-366, pp.816-821, 2008/03. (EI)
Chi-Yuan Lee, Shuo-Jen Lee, Dai, C.-L, Hsieh, C.-L and Lee, Y.-M, “Metal Bipolar Plate with Micro Sensors,” Key Engineering Materials, 364-366, pp.861-866, 2008/03. (EI)
Chi-Yuan Lee, Shuo-Jen Lee and Wu, G.-W, “Integration of Micro Array Sensors in the MEA on Diagnosis of Micro Fuel Cells,” Key Engineering Materials, 364-366, pp.855-860, 2008/03. (EI)
S.-T Ke, J.-L Lee, Y.-M Yen, Shuo-Jen Lee and M.-D Ger, “A Study of the Microstructure and Properties of Electroformed Ni-P Model Insert,” Key Engineering Material, 364-366, pp.232-236, 2008/03. (EI)
Chi-Yuan Lee, Shuo-Jen Lee, C.-L. Dai, C.-H. Wu and M.-D Ger, “Integration of Micro Temperature Sensor and Heater in a Stainless Steel-based Micro Reformer,” Key Engineering Materials, 364-366, pp.843-848, 2008/03. (EI)
Y.H. Chou, C.Y. Bai, M.D. Ger, Shuo-Jen Lee, Chi-Yuan Lee and C.L Chao, “Studies on Ni-Mo-P Coatings by Electroless Deposition,” Key Engineering Materials, 364-366, pp.333-339, 2008/03. (EI)
Chi-Yuan Lee, Shuo-Jen Lee, Ching-Liang Dai and Chih-Wei Chuang, “Application of Porous Silicon on the Gas Diffusion Layer of Micro Fuel Cells,” Key Engineering Materials, 364-366, pp.849-854, 2008/03. (EI)
Shuo-Jen Lee, Yu-Ming Lee, Chi-Yuan Lee, Jian-Jang Lai, K. T. Yang and Feng-Hui Kuan, “The Electrochemical Micro- fabrication Method for Micro-scale Flow Channels,” Key Engineering Materials, 364-366, pp.885-890, 2008/03. (EI)
Shuo-Jen Lee, Jian-Jang Lai, Yu-Ming Lee, Chi-Yuan Lee, K.T. Yang and C.W. Peng, “Improving Machining Accuracy of the EMM Process Through Multi-physics Analysis,” Key Engineering Materials, 364-366, pp.891-896, 2008/03. (EI)
S. J. Lee, Y. M. Lee, C. Y. Lee, J. J. Lai, K. T. Yang and F. H. Kuan, “The Electrochemical Micro-fabrication Method for Micro-scale Flow Channels,” Key Engineering Materials, Vols. 364-366 pp. 885-890, 2008. (EI)
Shuo-Jen Lee, Yu-Ming Lee, Chi-Yuan Lee, Jian-Jang Lai, Feng-Hui Kuan and Chih-Wei Chuang, “The Performance of Miniature Metallic PEM Fuel Cells,” Journal of Power Sources, 171, pp.148-154, 2007/09. (SCI)
Chi-Yuan Lee, Shuo-Jen Lee, Ren-De Huang and Chih-Wei Chuang, “Integration of the Micro Thermal Sensor and Porous Silicon as the Gas Diffusion Layer for Micro Fuel Cell,” IEEE Xplore database, pp. 1252-1255, 2007/08. (EI)
Chi-Yuan Lee, Shuo-Jen Lee and Guan-Wei Wu, “Fabrication of Micro Temperature Sensor on the Flexible Substrate,” IEEE Xplore database, pp. 1050-1053, 2007/08. (EI)
Shuo-Jen Lee and Dar-Yuan Chang, “A laser sensor with multiple detectors for freeform surface digitization,” International Journal of Advanced Manufacturing Technology, Vol.31(11-12), pp.1181-1190, 2007/02. (SCI)
Shuo-Jen Lee and Dar-Yuan Chang, “A laser sensor with multiple detectors for freeform surface digitization,” International Journal of Advanced Manufacturing Technology, Vol.31(5-6), pp.474-482, 2006/12. (SCI)
Shuo-Jen Lee, Yu-Ming Lee and Ming-Yu Chung, “Metal removal rate of the electrochemical mechanical polishing technology for stainless steel-the electrochemical characteristics,” Journal of Electronic Materials, Vol. 220, pp. 525-530, 2006/08. (SCI, IF: 1.270, Rank 162 of 275 in material science)
Shuo-Jen Lee, Jian-Jang Lai and Dar-Yuan Chang, “Surface faults evaluation by optical imaging method for electropolishing process,” Third international Symposium on Precision Mechanical Measurements, Vol. 6280, pp. 628026-1-6, 2006/08. (EI)
Chi-Yuan Lee, Shuo-Jen Lee and Ji-Lei Shieh, “Application of micro sensors on diagnosis of micro fuel cells,” IEEE Xplore database, pp. 434-437, 2007/01. (EI)
Chi-Yuan Lee* , Pei-Zen Chang , Yung-Yu Chen , Ching-Liang Dai , Xuan-Yu Wang , Ping-Hei Chen and Shuo-Jen Lee, “Novel Method for In-Situ Monitoring of Thickness of Silicon Wafer during Wet Etching,” Sensors and Materials, Volume 18, Issue 2, Pages 071-082, 2006. (SCI)
Shuo-Jen Lee, Ching-Han Huang, Yu-Pang Chen and Chen-Te Hsu, “PVD Coated Bipolar Plates for PEM Fuel Cells,” Journal of Fuel Cell Science and Technology, Volume 2, Issue 4, Pages 290-294, 2005/11. (SCI)
Chi-Yuan Lee, Pei-Zen Chang, Yung-Yu Chen, Ching-Liang Dai, Ping-Hei Chen and Shuo-Jen Lee, “Novel Method for In Situ Monitoring of Thickness of Quartz during Wet Etching,” Japanese Journal of Applied Physics, Vol. 44, No. 10, pp. 7662–7666, 2005/10. (SCI)
Shuo-Jen Lee, Jian-Jang Lai and Ching-Han Huang, “Stainless steel bipolar plates,” Journal of Power Sources, Volume 145, Issue 2, Pages 362-368, 2005/08. (SCI)
Shuo-Jen Lee, Yu-Pang Chen and Ching-Han Huang, “Electroforming of metallic bipolar plates with micro-featured flow field,” Journal of Power Sources, Volume 145, Issue 2, Pages 369-375, 2005/08. (SCI)
Shuo-Jen Lee, Chen-De Hsu and Ching-Han Huang, “Analyses of the fuel cell stack assembly pressure,” Journal of Power Sources, Volume 145, Issue 2, Pages 353-361, 2005/08. (SCI)
Shuo-Jen Lee, Ching-Han Huang, Yu-Pang Chen and Yen-Ming Chen, “Chemical Treatment Method for the Aluminum Bipolar Plates of PEM Fuel Cells,” Journal of Fuel Cell Science and Technology, Volume 2, Issue 3, Pages 208-212, 2005/08. (EI)
Shuo-Jen Lee, Ching-Han Huang, Jian-Jang Lai and Yu-Pang Chen, “Corrosion-resistant component for PEM fuel cells,” Journal of Power Sources, Volume 131, Issue 1-2 , Pages 162-168, 2004/05. (SCI)
Shuo-Jen Lee and Jian-Jang Lai, “The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel,” Journal of Materials Processing Technology, Volume 140, Issues 1-3, Pages 206-210, 2003/12. (SCI)
Yuan-Long Chen, Shu-Min Zhu, Shuo-Jen Lee, Jong C Wang, “The technology combined electrochemical mechanical polishing,” Journal of Materials Processing Technology, Volume 140, Issues 1–3, Pages 203-205, 2003/09. (SCI)
Shuo-Jen Lee, Yu-Ming Lee, Ming-Feng Du, “The polishing mechanism of electrochemical mechanical polishing technology,” Journal of Materials Processing Technology, Volume 140, Issues 1–3, Pages 280-286, 2003/09. (SCI).
Shuo-Jen Lee, Ching-Han Huang, Yu-Pang Chen, “Investigation of PVD coating on corrosion resistance of metallic bipolar plates in PEM fuel cell,” Journal of Materials Processing Technology, Volume 140, Issues 1–3, Pages 688-693, 2003/09. (SCI)
Shuo-Jen Lee and Fang-Bor Weng, “Recent R&D and future prospects of fuel cell technology in Taiwan,” Fuel Cells Bulletin, Volume 2002, Issue 2, Pages 8-11, 2002/02. (EI)
Lee Shuo-Jen and Fan TienJung, “Calibration method of parallel projection beams for 3D profile measurement,” Proceedings of SPIE - The International Society for Optical Engineering, Volume 2899, Pages 695-701, 1996. (EI)
Shou-Jen Lee, Henzer Chen, “Design optimization with back-propagation neural networks,” Journal of Intelligent Manufacturing, Volume 2, Issue 5, pp 293-303, 1991/10. (SCI)
V. Kumar, S.-J. Lee, M. D. German, “Finite element design sensitivity analysis and its integration with numerical optimization techniques for structural design,” Computers & Structures, Volume 32, Issues 3-4, Pages 883-897, 1989. (SCI)
S.J. Lee, S. G. Kapoor, “On the automatic ion of reanalysis techniques in machine tool structural element optimization,” Engineering Optimization, Volume 10, Issue 3, pages 163-181, 1986. (SCI)
S.J. Lee, S. G. Kapoor, “A shape and size optimization algorithm for machine tool element design,” Engineering Optimization, Volume 10, Issue 1, Pages 25-39, 1986. (SCI)
S.J. Lee, S. G. Kapoor, “Cutting Process Dynamics Simulation for Machine Tool Structure Design,” Journal of Engineering for Industry, Volume 108, Issues 2, Pages 68-74, 1986. (EI)
S.J. Lee, S. G. Kapoor, R. E. DeVor, “An Integrated Machining Process Design Simulator for the Optimal Design of Face Milling Systems,” Journal of Engineering for Industry, Volume 107, Issue 4, Pages 301-308, 1985. (EI)
國內期刊
李碩仁,黃仲成,高崇洋,”吊籠穩固裝置改良設計雛形製作與測試”,勞工安全衛生研究季刊,第十二卷第三期,第223-238頁,民國九十三年九月。
李碩仁,林克峰,戴基福,高崇洋,”車輛系油壓煞車系統含水量預警裝置之研發”,勞工安全衛生研究季刊,第十二卷第二期,第137-145頁,民國九十三年六月。
李碩仁,林克峰,戴基福,高崇洋,”車輛系油壓煞車系統失效溫度預警裝置之研發”,勞工安全衛生研究季刊,第十二卷第一期,第11-22頁,民國九十三年三月。
李碩仁,黃智豪,黃仲成,戴基福,高崇洋,王書隆,” 吊籠作業中安全穩固裝置吸盤式設計”,勞工安全衛生研究季刊,第十一卷第二期,第137-151頁,民國九十二年六月。
國際會議
Chi-Yuan Lee; Shuo-Jen Lee; Jyun-Ting Lin; Yi-Chang Shiu; Chao-Yang Hsu; Po-Yeng Chao, “Temperature and humidity microsensor for intelligent production of roll-to-roll process,” 2017 International Conference on Mechatronic, Automobile, and Environment Engineering, p. 1025, 2017/05
Chi-Yuan Lee; Shuo-Jen Lee; I-M. Hung; Chien-Te Hsieh; Yu-Ming Chang; Jyun-Ting Lin, “Real-time monitoring of local temperature, voltage and current inside lithium battery,” Proceedings of the 1th International Conference on Engineering and Science (ICES 2016), pp. E – 104, 2016/07
Chi-Yuan Lee*, Shuo-Jen Lee, I-Ming Hung, Chien-Te Hsieh, Yu-Ming Chang and Jyun-Ting Lin (2016,07), “ Real-time monitoring of local temperature, voltage and current inside lithium battery, ” Proceedings of the 1th International Conference on Engineering and Science (ICES 2016), pp. E104, Yilan, Taiwan
Chi-Yuan Lee; Lee S.-J.; I-M. Hung; Chien-Te Hsieh; Yen-Pu Huang; Yu-Ming Chang; Chung-Wen Hsu, “Flexible micro temperature, voltage and current sensors for in situ monitoring in lithium batteries,” The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, p. BA-00154, 2014/10
Chi-Yuan Lee; Lee S.-J.; Yen-Pu Huang; Yi-Man Lo, “Micro thermocouple, RTD and voltage sensor for fuel cell interior monitoring,” The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, p. BA-00156, 2014/10
Chi-Yuan Lee*, Shuo-Jen Lee, Yun-Min Liu and Chung-Ju Lee (2014,07), “ Application micro flexible sensors in fuel cell for water and thermal monitoring, ” Grand Renewable Energy 2014 International Conference and Exhibition, pp. #106, Tokyo, Japan.
Chi-Yuan Lee; Lee S.-J.; Chung-Ju Lee; Fan-Hsuan Liu, “Apply micro flexible sensors in fuel cell for water and thermal monitoring,” The 16th International Conference on Advances in Materials and Processing Technologies, p. 30, 2013/09
Lee S.-J.; Yi-Ho Chen; Chao-Chang Chen; Yueh-Shiun Tsai; Jung-Chou Hung, “Improving Cylindricity and Concentricity of Hollow Cylinder Parts by Electrochemical Machining,” The 16th International Conference on Advances in Materials and Processing Technologies, p. 54, 2013/09
Shuo-Jen Lee*, Chi-Yuan Lee, Ming-Shao Tang, Yu-Ming Chang and Pei-Chi Chen (2012,06), “ In situ monitoring of temperature and voltage in lithium-ion rechargeable batteries using flexible micro two-in-one sensors, ” Microtech 2012 - Microtechnology Conference and Expo, pp. 126-129, California, USA.
Chi-Yuan Lee*, Shuo-Jen Lee, Yu-Ming Lee, Ming-Shao Tang, Pei-Chi Chen and Yu-Ming Chang (2012,03), “ In situ monitoring of temperature using flexible micro temperature sensors inside polymer lithium-ion battery, ” The 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, pp. #79, Kyoto, Japan.
Chi-Yuan Lee*, Shuo-Jen Lee, Yen-Ting Cheng and Yu-Ming Chang (2012,11), “ Micro pressure, temperature and flow sensors for integration in micro methanol reformer, ” The 2nd International Conference on Engineering and Technology Innovation, pp. J1032, Kaohsiung, Taiwan.
Lee S.-J.; 施丞鴻; Yu-Cheng Chang; Shiow-Long Chen; Ke, Wen, “Influence of The Molybdenum Thickness on The Conversion Efficiency of Thin-film A-Si:H Solar Cells Grown on A 304BA Stainless Steel Substrate,” TACT 2011 International Thin Films Conference, p. F20110520015, 2011/11
Lee S.-J.; Yi-Ho Chen; Tai-Lun Poon; Yu-Cheng Chang, “Micro-patterning on stainless steel 304 by Electro chemical Machining method,” ICETI 2011 Proceedings of the First International Conference on Engineering and Technology Innovation 2011, p. A1012, 2011/11
Chi-Yuan Lee; Lee S.-J.; Ming-Yu Chung; Kuo-Chang Han; Kuan-Yuen Liao; Sheng-Wei Chen; Wen-Jiun Liu; Ming-Shao Tang; Yi-Man Lo; Pei-Chi Chen, “In situ measurement of the inner temperature of a lithium battery by using a flexible micro temperature sensor,” IUMRS-ICA 2011 12th International Conference in Asia, p. 0060, 2011/09
Chi-Yuan Lee; Lee S.-J.; Chien-Te Hsieh; Ming-Shao Tang; Jia-Yi Lin; Yi-Man Lo; Pei-Chi Chen; Dar-Yuan Chang; Juang R.-S., “In Situ Monitoring of Voltage and Temperature in Lithium Batteries,” The 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, pp. 243 – 246, 2011/02
W.C.Ke; Lee S.-J.; C. Y. Kao, “Effects of doping concentration on the characteristics of p-type GaN films,” IUMRS-ICEM2010, pp. na – na, 2010/08
柯文政; 李碩仁; 高嘉佑; 陳衛國; 周武清; 張文豪; 程一誠; 李大青; 林家慶, “Growth and optical properties of high-density InN nanodots,” TechConnect World Conference and Expo 2010, pp. 125 – 128, 2010/06
Chi-Yuan Lee, Shuo-Jen Lee, Tachung Yang, Pin-Cheng Chan, and Chen-Yi Chao, "Fabrication of flexible micro-sensors for in-situ measurement of fuel flow in a fuel cell," Eleventh Grove Fuel Cell Symposium, pp.FC031, 2009/09.
Chi-Yuan Lee, Shuo-Jen Lee, Chia-chieh Shen, Chi-Chung Chang, and Chien-Heng Lin, "Micro-sensors with novel micro-channels in a micro-reformer," Eleventh Grove Fuel Cell Symposium, pp.FC030, 2009/09.
Tachung Yang, Chi-Yuan Lee, Shuo-Jen Lee, and Tzu-Hao Chien, "Fabrication of flexible micro-sensors based on micro electro mechanical systems technology for proton exchange membrane fuel cell applications," Eleventh Grove Fuel Cell Symposium 2009, pp. FUCE2009_0035, 2009/09.
楊大中; 李其源; 李碩仁; Tzu-Hao Chien, “Fabrication of flexible micro-sensors based on micro electro mechanical systems technology for proton exchange membrane fuel cell applications,” Eleventh Grove Fuel Cell Symposium 2009, p. FUCE2009_0035, 2009/09
李其源; 李碩仁; 楊大中; Pin-Cheng Chan; Chen-Yi Chao, “Fabrication of flexible micro-sensors for in-situ measurement of fuel flow in a fuel cell,” Eleventh Grove Fuel Cell Symposium, p. FC031, 2009/09
李其源; 李碩仁; 沈家傑; Chi-Chung Chang; Chien-Heng Lin, “Micro-sensors with novel micro-channels in a micro-reformer,” Eleventh Grove Fuel Cell Symposium, pp. 10630 – 10634, 2009/09
Min-Chien Hsiao, Shu-Hang Liao, Ming-Yu Yen, Chen-Chi Ma, Shuo-Jen Lee, Chih-Hung Hung, and Yu-Feng Lin, "Electrical and Thermal Conductivities of Novel Metal Mesh Hybrid Polymer Composite Bipolar Plates for Proton Exchange Membrane Fuel Cells," Seventh International Fuel Cell Science Engineering and Technology Conference, Newport Beach, California, USA, 2009/06.
S.I. Tsaia, C.Y. Baia, Shuo-Jen Lee, and M.D. Ger, "Surface Characteristics of the Aluminum Bipolar Plates Modified by Non-isothermal Deposition and Displacement Deposition Methods," 215th ECS Meeting 2009, San Francisco, California, USA, 2009/05.
Chi-Yuan Lee, Shuo-Jen Lee, Yu-Ming Lee, and Kuan-Yu Chu, "Integration of Micro Flow Sensor and Flexible Substrate as GDL in Micro Fuel Cell," The 4th Annual International Conference on Nano/Micro Engineered and Molecular Systems, pp.632-635, 2009/01.
Chi-Yuan Lee, Shuo-Jen Lee, Wen-Pin Shih, Chen-Hen Lin, Chi-Chung Chang, and Pei-Zen Chang," Fabrication of Micro Temperature Sensor and Heater in a Stainless Steel-based Micro Reformer," The 4th Annual International Conference on Nano/Micro Engineered and Molecular Systems, pp.168-174, 2009/01.
Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Chen-Hen Lin, Yu-Ming Lee, and Wei-Yuan Fan, "Integration of Micro Temperature Sensor and Metal Foil as Gas Diffusion Layer for Micro Fuel Cell," The 4th Annual International Conference on Nano/Micro Engineered and Molecular Systems, pp.164-167, 2009/01.
Chi-Yuan Lee, Shuo-Jen Lee, Chia-Chieh Shen, Chien-Heng Lin, Yu-Ming Lee, Wei-Jung Hsieh, and Kuan-Yu Chu, "A Novel Integration Approach for Combining Microsensors in a Stainless Steel-based Micro Reformer," Fuel Cells Science and Technology 2008, pp.FUCE2008-0023, 2008/10.
Chi-Yuan Lee, Shuo-Jen Lee, Yu-Ming Lee, Chien-Heng Lin, and Wei-Jung Hsieh, "Integration of Microsensor and Stainless Steel Foil as Gas Diffusion Layer in Micro Fuel Cell," Fuel Cells Science and Technology 2008, pp.FUCE2008– 0024 , 2008/10.
Chi-Yuan Lee, Shuo-Jen Lee, Wei-Jung Hsieh, Yu-Ming Lee, and Ren-De Huang, "Real Time Monitoring of Temperature Distribution in a Fuel Cell by Array Flexible Microsensors," Fuel Cells Science and Technology 2008, pp.FUCE2008 -0027,2008/10.
Yu-Ming Lee, Shuo-Jen Lee, and Chi-Yuan Lee, "The Multiphysics Analysis of the Metallic Bipolar Plate EMM Fabrication Process," Fuel Cells Science and Technology 2008, pp.FUCE2008-2362, 2008/10.
Shuo-Jen Lee, Chi-Yuan Lee, Ching Yuan Bai, and Ming Der Ger,"Metallic Bipolar Plates," 2008 International Fuel Cell Symposium, Taoyuan, Taiwan, 2008/09.
Chi-Yuan Lee, Shuo-Jen Lee, Ren-De Huang, and Chih-Wei Chuang, "Integration of the Micro Thermal Sensor and Porous Silicon as the Gas Diffusion Layer for Micro Fuel Cell," IEEE-NANO 2007, p.p.1252-1255, 2007/08.
Chi-Yuan Lee, Shuo-Jen Lee, and Guan-Wei Wu, "Fabrication of Micro Temperature Sensor on the Flexible Substrate," IEEE-NANO 2007, p.p. 1050 -1053, 2007/08.
Chi-Yuan Lee, Shuo-Jen Lee, Jian-Lin Liu, and Ren-De Huang, "Integration of Porous Silicon as Gas Diffusion Layer in Micro Fuel Cells," Tenth Grove Fuel Cell Symposium 2007, p.p.FUCE20070047, 2007/09.
Chi-Yuan Lee, Shuo-Jen Lee, Wei-Jung Hsieh, and Guan-Wei Wu, "Embedded Flexible Micro Sensors in MEA for Measuring the Temperature and Humidity in a Micro Fuel Cell," Tenth Grove Fuel Cell Symposium 2007, p.p. FUCE20070046, 2007/09.
Yu-Ming Lee, Shuo-Jen Lee, Chi-Yuan Lee, and Ping-Hung Lai, "Surface Treated SS304 Stainless Steel Bipolar Plates –Its Properties and Single Cell Performance," 2008 Sixth International Fuel Cell Science, Engineering and Technology Conference, p.p.FuelCell2008-65152, 2008/06.
Shuo-Jen Lee, Kung-Ting Yang, and Yuzn-Jhe Chang, "Stack Assembly Design for Uniform Pressure Distribution of Thin Metallic Fuel Cells," Sixth International ASME Conference on Fuel Cell Science, Engineering and Technology, Fuel Cell 2008-65176, 2008/06.
Shuo-Jen Lee, Kung-Ting Yang, and Chi-Yuan Lee, "The Resistive Properties PEM Fuel Cells With," Sixth International Fuel Cell Science, Engineering and Technology Conference, p.p.2008-65151, 2008/06.
Yu-Ming Lee, Shuo-Jen Lee, and Cheng-Hong Shih, "A EMM Fabrication Method of Metallic Bipolar Plates for PEM Fuel Cell," Sixth International ASME Conference on Fuel Cell Science, Engineering and Technology, p.p.2008-65160, 2008/06.
Chi-Yuan Lee, Shuo-Jen Lee, 莊志偉,李諭銘,"A novel integration approach for combining the components to minimize a micro fuel cell, "Fuel Cells Science and Technology 2006, FC132, 2006/09.
Chi-Yuan Lee, Shuo-Jen Lee, 吳冠緯, 李諭銘,"Integration of micro array sensors in the MEA of a fuel cell,"Fuel Cells Science and Technology 2006, FC369, 2006/09.
Chi-Yuan Lee, Shuo-Jen Lee, 謝箕烈, 李諭銘, "In-situ measuring of temperature and humidity within the portable fuel cell by micro sensors,"Fuel Cells Science and Technology 2006, FC120, 2006/09.
Chi-Yuan Lee, Shuo-Jen Lee, 吳錦華, 吳冠緯, 李諭銘,"Combining a micro temperature sensor and a heater in a silicon-based micro reformer," Fuel Cells Science and Technology 2006, FC389, 2006/09.
Chi-Yuan Lee, Shuo-Jen Lee, 莊志偉,"Application of porous silicon on the gas diffusion layer of micro fuel cells," 2006 International Fuel Cell Symposium, pp.189-194, 2006/09.
Chi-Yuan Lee, Shuo-Jen Lee, 謝箕烈, 吳冠緯, 李諭銘,"微型燃料電池之功能性金屬雙極板製作研究,"第十屆奈米工程暨微系統技術研討會, ID74, 2006/12.
Chi-Yuan Lee, Shuo-Jen Lee, and 謝箕烈,"Application of micro sensors on diagnosis of micro fuel cells,"2nd International Conference on Nano/Micro Engineered and Molecular Systems, pp.434-437, 2007/01.
Chi-Yuan Lee, Shuo-Jen Lee, 吳錦華, 吳冠緯,"Monitoring of temperature distribution within a silicon-based micro reformer using array micro sensors," Asia Pacific Conference on Optics Manufacture 2007, pp.210, TW, 2007/01.
Chi-Yuan Lee, Shuo-Jen Lee, 吳錦華,葛明德,"Integration of micro temperature sensor and heater in a stainless steel-based micro reformer," Asia Pacific Conference on Optics Manufacture 2007, pp.201, TW, 2007/01.
Chi-Yuan Lee, Shuo-Jen Lee, and 莊志偉,"Application of porous silicon on the gas diffusion layer of micro fuel cells,"Asia Pacific Conference on Optics Manufacture 2007, pp.211, TW, 2007/01.
Chi-Yuan Lee, Shuo-Jen Lee, 吳冠緯,"Integration of micro array sensors in the MEA on diagnosis of micro fuel cells," Asia Pacific Conference on Optics Manufacture 2007, pp.212, TW, 2007/01.
Chi-Yuan Lee, Shuo-Jen Lee, 謝箕烈, 李諭銘,"Metal bipolar plate with micro sensors," Asia Pacific Conference on Optics Manufacture 2007, pp.213, TW, 2007/01.
Shuo-Jen Lee, 李諭銘, Chi-Yuan Lee, 賴建璋, 楊恭廷, 官峰輝, "The electrochemical micro-fabrication method for micro-scale flow channels," Asia pacific conference on optics manufacture, 2007/05.
Shuo-Jen Lee, 賴建璋, 李諭銘, 葛明德, 程世偉,"Uniformity analysis of the passive film for SS316 stainless steel," Asia pacific conference on optics manufacture, 2007/05.
Shuo-Jen Lee, 賴建璋, 李諭銘, Chi-Yuan Lee, 楊恭廷, 彭成偉,"Improving Machining Accuracy of the EMM process through Multi-physics Analysis," Asia pacific conference on optics manufacture, 2007/05.
Shih-Tsung Ke, Jeou-Long Lee, Yih-Min Yeh, Shuo-Jen Lee, and Ming-Der Ger, "A Study of the Microstructure and Properties of Electroformed Ni-P Model Insert," Asia pacific conference on optics manufacture, 2007/05.
Yu Hsien Chou, Ching Yuan Bai, Ming-Der Ger, Shuo-Jen Lee, Chi-Yuan Lee, and 趙鉅隆, "Studies on Ni-Mo-P Coatings by Electroless Deposition," Asia pacific conference on optics manufacture, 2007/05.
Shuo-Jen Lee, 賴建璋, 官峰輝, T.K Lin, "Improving altered Layer Properties for SS316 stainless steels for the electroplishing process, "Asia pacific conference on optics manufacture, 2007/05.
Chi-Yuan Lee, Shuo-Jen Lee, 吳錦華, 林建亨, 葛明德,"Application of micro sensors on diagnosis of micro reformer," 35th International MATADOR Conference 2007, pp.ID133, 2007/07.
Chi-Yuan Lee, Shuo-Jen Lee, 莊志偉, 黃任德,"A novel integration approach for combining the porous silicon on a micro fuel cell," 35th International MATADOR Conference 2007, pp. ID134, 2007/07.
Chi-Yuan Lee, Shuo-Jen Lee, 吳冠緯,"In-situ measuring of temperature and humidity within the membrane electrode assembly by micro sensors," 35th International MATADOR Conference 2007, pp. ID135, 2007/07.
Shuo-Jen Lee, Ke-Feng Lin, Chung-Yun Gau, Bor-Tsuen Lin,” The Development of an Alarm Device for the Moisture Content in the Hydraulic Fluid of the Automobile Brake System,” SAE Technical paper series, 1999-01-0475, 1999/03.
Lee Shuo-Jen,Chung, Ming-Yuh, Roan Rey-Der and Wang Liang-Yuh, “Development of a multi-purpose CNC machine for press die full mold forms,” Winter Annual Meeting of the American Society of Mechanical, Engineers1994, Pages 1-7.
一般會議
Chi-Yuan Lee; Shuo-Jen Lee; I-M. Hung; Chien-Te Hsieh; 黃彥庭; 張育銘, “鋰電池內局部微觀觀測溫度、電壓及電流變化,” 中國機械工程學會第三十二屆全國學術研討會, p. 0556, 2015/12
Chi-Yuan Lee; Shuo-Jen Lee; I-M. Hung; Chien-Te Hsieh; 蔡朝軒; 張育銘,“整合式微型感測器即時微觀監測鋰電池內部之局部溫度、電壓及電流,” 中國機械工程學會第三十二屆全國學術研討會, p.0559,2015/12
黃彥庭、李其源*、李碩仁、洪逸明、謝建德、張育銘 (2015,10),“ 整合式微型感測器即時微觀監測鋰電池內部之局部溫度、電壓及電流, ”,第十屆全國氫能與燃料電池學術研討會,pp. 038,桃園市中央大學,中華民國。
Chi-Yuan Lee; Lee S.-J.; I-M. Hung; Chien-Te Hsieh; 黃彥浦; 張育銘; 徐仲彣,“鋰電池內部之溫度、電壓及電流即時量測技術開發,”2014台灣化學工程學會61週年年會暨科技部化學工程學門成果發表會, p. E_P_Y_025, 2014/12
Chi-Yuan Lee; Lee S.-J.; 黃彥浦; 羅義勉; 林季儒,“整合式微熱電偶、電阻式溫度及電壓感測器嵌入燃料電池即時量測,”2014台灣化學工程學會61週年年會暨科技部化學工程學門成果發表會, p. L_P_Y_010, 2014/12
Chi-Yuan Lee; Lee S.-J.; Chien-Te Hsieh; I-M. Hung; 張育銘; 劉芸旻,“二合一可撓式微感測器應用於鈕扣型半電池內部溫度及電壓之即時量測,”中國機械工程學會第三十屆全國學術研討會, p. 1448, 2013/12
Chi-Yuan Lee; Lee S.-J.; I-M. Hung; Chien-Te Hsieh; 張育銘; 劉范暄,“可撓式微溫度、電壓及電流感測器應用於鋰電池內部即時監測,”第八屆全國氫能與燃料電池研討會, p. B2-2, 2013/10
黃俊維; 陳貽和; Lee S.-J.,“不銹鋼SS430鈍化研究,”中國機械工程學會第二十九屆全國學術研討會, pp. na – na, 2012/12
Lee S.-J.; 王世衛; 吳炫昇; 鍾國馨; 沈炳臣; 黃靖淵,“高強度保險桿成形參數優化,”中國機械工程學會第二十九屆學術研討會, pp. D005 – 008, 2012/12
李其源*、李碩仁、沈家傑、張育銘、張育銘、劉范暄 (2012,10),“ 整合式微型感測器應用於微型甲醇重組器內部微觀監測溫度、流量及壓力,”,第七屆全國氫能與燃料電池學術研討會,pp. AH2001,台中市國立勤益科技大學,中華民國。
李其源*、李碩仁、沈家傑、張育銘、劉范暄 (2012,12),“微型多功能感測器應用於微型甲醇重組器內部溫度、流量及壓力狀態監控,”,中國機械工程學會第二十九屆全國學術研討會,pp. 1502,高雄市國立中山大學,中華民國。
李其源*、李碩仁、鍾明裕、韓國璋、唐銘劭、陳佩琪、劉范暄 (2012,12),“ 應用可撓式微型感測器於堆疊式鋰電池內部之溫度與電壓即時監測, ”,中國機械工程學會第二十九屆全國學術研討會,pp. 1503,高雄市國立中山大學,中華民國。
李碩仁、李其源、鍾明裕、陳貽和、劉兆凱*、張育銘、游文志 (2012,12),“ 開發平面可撓式微溫度感測器應用於鋰電池模組內部即時監測,”,中國機械工程學會第二十九屆全國學術研討會,pp. 1873,高雄市國立中山大學,中華民國。
李碩仁、鍾明裕、李其源、陳貽和、劉兆凱*、游文志 (2012,12),“鋰電池模組內部嵌入平面式微溫度感測器之即時監測,”,中國機械工程學會第二十九屆全國學術研討會,pp.1875,高雄市國立中山大學,中華民國。
蔡岳勳; 陳貽和; 洪榮洲; Lee S.-J.,“精微圓孔電化學加工電極設計分析,” 中國機械工程學會第二十九屆全國學術研討會, pp. na – na, 2012/12
Chi-Yuan Lee; Lee S.-J.; Chia-chieh Shen; 張育銘; 劉范暄,“整合式微型感測器應用於微型甲醇重組器內部微觀監測溫度、流量及壓力,”第七屆全國氫能與燃料電池學術研討會, p. AH2001, 2012/10
沈炳臣; 何明雄; 張志毅; Lee S.-J.; 王世衛; 張家源; 吳炫昇; 鍾國馨; 林國豪, “材料模型對高強度鋼汽車保險桿成形數值模擬的影響探討,”第十六屆車輛工程學術研討會, p. A1-001, 2011/11
Chi-Yuan Lee; Lee S.-J.; 鍾明裕; 韓國璋; 唐銘劭; 陳佩琪; 張育銘,“可撓式微溫度感測器嵌入鋰電池內部即時監測,”中國機械工程學會第二十八屆全國學術研討會, pp. E08 – 004, 2011/12
Chi-Yuan Lee; Lee S.-J.; 唐銘劭; 陳佩琪; 陳宗孟, “可撓式微溫度與電壓感測器之電解液浸泡及熱衝擊實驗,”中國機械工程學會第二十八屆全國學術研討會, pp. A08 – 010, 2011/12
陳佑論; 洪榮洲; 陳弘毅; Lee S.-J., “使用數值方法於電化學微孔加工電極刀具設計之研究,” 中國機械工程學會第二十八屆全國學術研討會, pp. D05 – 008, 2011/12
沈炳臣; Lee S.-J.; 王世衛; 張家源; 吳炫昇; 鍾國馨; 林國豪, “高強度汽車保險桿成形技術研究,” 中國機械工程學會第二十八屆全國學術研討會, pp. D05 – 012, 2011/12
Lee S.-J.; 沈炳臣; 王世衛; 張家源,“熱成形高強度鋼22MnB5鋼板冷卻模擬與驗證,”中國機械工程學會第二十八屆全國學術研討會, pp. D05 – 006, 2011/12
Chi-Yuan Lee; Lee S.-J.; Chia-chieh Shen; Chuin-Tih Yeh; 張几中; 羅義勉,“可撓式微型感測器應用於甲醇蒸汽重組反應之微重組器,”中國機械工程學會第二十七屆全國學術研討會, pp. EE12 – 004, 2010/12
Chi-Yuan Lee; Lee S.-J.; Chia-chieh Shen; Chuin-Tih Yeh; 張几中; 羅義勉,“可撓式微型感測器應用於氧化性甲醇蒸汽重組反應之微重組器,”中國機械工程學會第二十七屆全國學術研討會, pp. EE13 – 006, 2010/12
Chi-Yuan Lee; Lee S.-J.; Chien-Te Hsieh; 唐劭銘; 林嘉儀; 羅義勉; 陳佩琪; Juang R.-S., “可撓式微溫度與電壓感測器應用於鋰電池內部即時監測之製程研究,” 中國機械工程學會第二十七屆全國學術研討會, pp. EE11 – 008, 2010/12
王仲敏; Chia-chieh Shen; Lee S.-J., “氫化法調控Ti-6Al-4V機械性質研究,”2010中國材料科學學會年會, pp. 270 – 270, 2010/12
Chi-Yuan Lee; Lee S.-J.; Chia-chieh Shen; Chuin-Tih Yeh; 林建亨; 羅義勉, “微流體感測器應用於微重組器之製程研究,”中國機械工程學會第二十七屆全國學術研討會, pp. EE13 – 008, 2010/12
Chi-Yuan Lee, Shuo-Jen Lee, Chia-chieh Shen, 張几中, and 林建亨, "製作新型微流道板及微感測器應用於微型甲醇重組器,"中國機械工程學會第二十六屆全國學術研討會, pp.E12-007, 2009/11.
Chi-Yuan Lee, Shuo-Jen Lee, Chia-chieh Shen, 吳文婷, and 張几中, "新型流道板製作與微反應器組裝,"中國機械工程學會第二十六屆全國學術研討會, pp.A11-002, 2009/11.
Chi-Yuan Lee, Shuo-Jen Lee, Fangbor Weng, 紀丕鴻, Guo-Bin Jung, 徐俊英, 謝維容, and 范維元, "可撓式多功能微感測器應用於監控質子交換膜燃料電池,"中國機械工程學會第二十六屆全國學術研討會, pp.A14-008, 2009/11.
蕭閔謙; 廖述杭; 翁政智; 顏銘佑; 馬振基; 李碩仁; 蘇艾,“環氧樹織改質奈米碳管補強燃料電池用聚丙烯複合材料雙極板,”2009中華民國高分子學會年會, p. G-035, 2009/01
廖述杭; 蕭閔謙; 顏銘佑; 馬振基; 李碩仁; 蘇艾,“燃料電池用金屬網補強碳奈米管/乙烯酯樹脂/石墨複合材料雙極板之製備與性質研究,”2009中華民國高分子學會年會, p. F-088, 2009/01
著作
林昇佃,余子隆,張幼珍,翁芳柏,李碩仁,林育才,吳和生,魏榮宗,林修正,賴子珍,曾盛恕,詹世弘,”染料電池:新世紀能源”,滄海書局,2004。
李碩仁,費業泰,”精密機械精度基礎 ”,高立圖書有限公司,2003。
Shuo-Jen Lee and Wen-Cheng Ke, “Enhanced Diffuse Reflection of Light by Using a Periodically Textured Stainless Steel Substrate, “ Edited by Leonid A. Kosyachenko “Solar Cells thin-film technologies” (Chapter 2).
專利
李碩仁,李奇旺,莊勝銘,“具有模組化電極組件之廢水處理裝置”,中華民國發明第I682903號專利權,2020/01/21
李碩仁,李奇旺,莊勝銘,彭煥之,“可供入高壓氣體之廢水處理裝置”,中華民國發明第I649269號專利權,2019/02/01
李其源,李碩仁,陳傳生,樊晉源,趙柏穎,許朝揚,林俊廷,“應用於偏光片的製造方法及其製造系統”,中華民國發明第I631439號專利權,2018/08/01
李碩仁,李奇旺,莊勝銘,彭煥之,“連續式之廢水的處理裝置及處理方法”,中華民國發明第I605020號專利權,2017/11/11
王世衛,李碩仁,沈炳臣,張家源,“板材異常分析方法與其成形極限曲線計算方法”,中華民國發明第I545455號專利權,2016/08/11
李碩仁,張振緯,謝政翔,“具有電解水生成部之冷卻水塔循環水系統之管路水垢降低裝置”,中華民國發明第I532963號專利權,2016/05/11
李碩仁,張振緯,謝政翔,“具有電解水生成部之冷卻水塔循環水系統之電解吸附水垢裝置”,中華民國發明第I507255號專利權,2015/11/11
胡松城,林以中,李碩仁,陳貽和,“多段可調連續式電化學拋光系統”,中華民國發明第I460781號專利權,2014/11/11
沈幼敏,李碩仁,沈和畇,金麟聖,李其源,柯文政,“高密度微波與特高頻混成式電漿鍍膜裝置”,中華民國發明第I393489號專利權,2013/04/11
李其源,李碩仁,李諭銘,翁芳柏,紀丕鴻,“燃料電池內部狀態之診斷系統”,中華民國發明第I382583號專利權,2013/01/11
沈幼敏,李碩仁,沈和畇,李其源,柯文政,“電容式電漿與線性微波電漿之混成鍍膜裝置”,中華民國發明第I378154號專利權,2012/12/01
馬振基 ,蕭閔謙,廖述杭 ,顏銘佑,顏銓佑,翁政智 ,李碩仁,“燃料電池用金屬網/奈米碳管/高分子複合材料雙極板之製備方法”,中華民國發明第I374568號專利權,2012/10/11
李碩仁,葛明德,程偉堃,“具有三價鉻鈍化皮膜之燃料電池雙極板”,中華民國發明第I372484號專利權,2012/09/11
李碩仁,陳貽和,“具有預熱結構之熱水裝置”,中華民國新型第M433539號專利權,2012/07/11
葛明德,李碩仁, 白清源,李其源,趙鉅隆,周育賢,“具有表面改質層之鋁合金雙極板及其製法”,中華民國發明第I364865號專利權,2012/05/21
蘇艾,劉英傑,李其源,李碩仁,“具有濕度感測之發光二極體”,中華民國發明第I362125號專利權,2012/04/11
李碩仁,李其源,程世偉,官峰輝,“間接鎖合式燃料電池”,中華民國發明第I354394號專利權,2011/12/11
葉明堂,戴雲城,陳詩薇,李碩仁,“非鐵金屬板材之快速成型方法”,中華民國發明第I332869號專利權,2010/11/11
李碩仁,陳貽和,“電化學滾筒電解裝置”,中華民國新型第M401212號專利權,2011/04/01
李碩仁,“太陽能追蹤裝置”,中華民國發明第I339255號專利權,2011/03/21
Ay Su, Ying-Chieh Liu, Chi-Yuan Lee, Shuo-Jen Lee, “LED Device Having a Humidity Sensor,” United State Patent, US 7905628 B2, 2011/03/15
李其源,李碩仁,林建亨,黃任德,謝維容,“具有二維分佈之微電阻單元之薄片的流體反應器”,中華民國發明第I337257號專利權,2011/02/11
Chi-Yuan Lee, Shuo-Jen Lee, Chin-Hua Wu, Guan-Wei Wu, “Micro reactor having micro flow-guiding blocks,” United State Patent US 7846398 B2, 2010/12/07
李碩仁,賴建璋,李諭銘,“結合電化學加工與電解拋光的複合式微加工裝置及方法”,中國大陸專利CN101113530B,2010/09/08
Chi-Yuan Lee, Shuo-Jen Lee, Guan-Wei Wu, “Manufacturing method of fuel cell having micro sensors and polymer layers,” United State Patent US7781151B2, 2010/8/24
李其源,李碩仁,吳冠緯,“具有微感測器及高分子材料之燃料電池之製法”,中華民國發明第I329382號專利權,2010/08/21
李其源,李碩仁,吳錦華,吳冠緯,“薄片式感知裝置”,中華民國發明第I325652號專利權,2010/06/01
李其源,李碩仁,莊志偉,謝箕烈,吳冠緯,李諭銘,“整合觸媒層及微感測器之燃料電池之製法”,中華民國發明第I321373號專利權,2010/03/01
李碩仁,李其源,“燃料電池的複合式雙極板”,中國大陸專利CN100505394C,2009/06/24
李其源,李碩仁,吳錦華,吳冠緯,“具有微流道導流塊之微反應裝置”,中華民國發明第I300401號專利權,2008/09/01
李碩仁, 賴建彰,李諭明,“結合電化學加工與電解拋光之複合式微加工裝置及方法”,中華民國發明第I298359號專利權,2008/07/01
陳弘毅,李碩仁,“多片式燃料電池之極板結構”,中華民國發明第I290383號專利權,2007/11/21
莊向鈞,李碩仁,“可各別運作之液壓平衡式雙支撐結構”,中華民國發明第I283215號專利權,2007/07/01
郭佳儱,李碩仁,陳炤彰,“電解拋光處理系統及方法”,中華民國發明第I281519號專利權,2007/05/21
郭佳儱, 李碩仁,陳炤彰,“可撓式薄片之軟磨料拋光加工方法及裝置”,中華民國發明第I280176號專利權,2007/05/01
李碩仁,李其源,“燃料電池之複合式雙極板”,中華民國發明第I264846號專利權,2006/10/21
郭佳儱,李碩仁,陳炤彰,“具有電化學及拋光處理之裝置及方法”,中華民國發明第I263553號專利權,2006/10/11
郭佳儱, 李碩仁,陳炤彰,“可間歇性供電之裝置”,中華民國發明第I247641號專利權,2006/01/21
李碩仁,陳邦裕,黃敬涵,“具微流道之燃料電池雙極板結構及其製法”,中華民國發明第I246792號專利權,2006/01/01
陳正民,楊東村,李碩仁,“發泡模具之封壓側板結構”,中華民國新型第M265207號專利權,2005/05/21
陳正民,楊東村,李碩仁,“冰箱隔熱材之填充治具”,中華民國新型第M265585號專利權,2005/05/21
陳正民,楊東村,李碩仁,“填充冰箱門體隔熱材之治具”,中華民國新型第M265586號專利權,2005/05/21
戴基福,高崇洋,李碩仁,沈育霖,“吊籠穩固裝置”,中華民國新型第553213號專利權,2003/09/11
李碩仁,賴建璋,廖子穎,鍾明裕,“工件外形表面電化學機械拋光之機構”,中華民國新型第516471號專利權,2003/01/01
Chi-Fu Tai, Shih-Hsiung Wu, Chung-Yun Gau, Shuo-Jen Lee, Ke-Feng Lin, “Advanced warning device for monitoring the working conditions of hydraulic brakes system of motor vehicles,” United State Patent US6119059A, 2000/9/12
戴基福,吳世雄,高崇洋,李碩仁,林克峰,“車輛油壓煞車失效安全預警裝置”,中華民國新型第385768號專利權,2000/03/21
王世衛,李碩仁,沈炳臣,鍾國馨,“材料強度之預測方法”,2015/07/16
李碩仁,陳貽和,“捲對捲式電化學機械拋光之研磨處理方法”,2013/10/01
李碩仁,李其源,鍾明裕,韓國璋,廖貫淵,“即時性防爆鋰電池”,2013/08/16
李碩仁,陳貽和,“以黏稠層生成凹陷通道而控制表面粗糙度之方法”,2013/07/16
李碩仁,陳貽和,“電池安全警示裝置”,2013/06/16
李碩仁,陳貽和,“太陽能電池之背反射結構及其製法”,2012/11/01
李碩仁,陳貽和,“太陽能電池之結構製法”,2012/11/01
李碩仁,李其源,“鋰電池內部狀態之診斷系統”,2012/01/01
白清源,溫澤民,李碩仁,簡伯修,“不鏽鋼雙極板表面改質層之製備方法”,2011/01/01
馬振基,蕭閔謙,廖述杭,翁政智,李碩仁,蘇艾,“燃料電池用高分子接枝奈米碳管/聚丙烯複合材料雙極板之製備方法”,2010/11/16
馬振基,廖述杭,翁政智,顏銓佑,蕭閔謙,顏銘佑,洪誌鴻,李碩仁,“燃料電池用奈米碳管強化半結晶性高分子複合材料雙極板之製備方法”,2010/06/01
李碩仁,“具有織質結構部之不鏽鋼基板”,2009/12/16
李碩仁,蔡世章,蔡碩恆,謝尚斌,“電化學反應的極性裝置”,2007/07/01
李碩仁,李其源,李諭銘,“具有微感測器之燃料電池”,2007/07/01
郭佳儱,李碩仁,陳炤彰,郭家誠,“導電薄片拋光加工裝置及方法”,2006/07/01
李碩仁,黃敬涵,賴建璋,陳裕邦,“燃料電池金屬極板的表面保護膜結構及表面處理方法”,2005/06/01
榮獲2008「第六屆有庠傑出教授獎」,2011「第九屆有庠傑出教授獎」。
榮獲2014「第十屆有庠元智講座」。
榮獲2008台北國際發明展銀牌及銅牌,2010台北國際發明展金牌及銅牌。
2012擔任工學院院長六年以來,積極推動院系招生、專業實習、產學團隊與工程認證等事宜。
2006擔任機械系主任六年期間,規劃元智大學第一間無塵室,成立微機電共同實驗室。
帶領機械系通過工程認證,開發認證資料輸入及分析軟體系統提供工學院及電通學院各系使用,協助輔導全校通過工程認證。
透過跨系合作,與藝設系合作申請大型計畫,結合二系創意及設計,已成為元智創意設計與國際交流典範課程。
擔任智慧生產與管理創新研究中心主任期間,建立元智大學CISCO-HyperFlex架構的大數據分析系統,工學院老師得以進行人深度學習等人工智慧科技研發及應用。
計畫編號 |
計畫名稱 |
執行起迄 |
108-2622-E-155-001-CC2 |
智慧監控連續式工業廢水處理系統開發與現場測試(2/2) |
2019/06/01~2020/05/31 |
MOST108-2622-E-155-001-CC2憶鐘,順源 |
智慧監控連續式工業廢水處理系統開發與現場測試(2/2) |
2019/06/01~2020/05/31 |
ME-107007增鴻科技 |
氫能與燃料電池智慧化載具應用先期開發合作 |
2019/01/15~2019/07/31 |
CFF-07001遠東集團 |
遠東集團工業4.0課程 |
2019/01/15~2019/07/31 |
GCP-107002高端企業 |
|
2018/10/01~2019/09/30 |
計畫編號 |
計畫名稱 |
執行起迄 |
107-2622-E-155-007-CC2 |
智慧監控連續式工業廢水處理系統開發與現場測試(1/2) |
2018/06/01~2019/05/31 |
107-2218-E-155-002 |
Roll-to-Roll製程智能生產-以顯示器偏光片生產為例(3/3) |
2018/10/01~2019/09/30 |
MOST107-2622-E-155-007-CC2憶鐘,順源 |
智慧監控連續式工業廢水處理系統開發與現場測試(1/2) |
2018/06/01~2019/05/31 |
CF0010-106001遠東集團 |
遠東集團工業4.0課程 |
2018/07/01~2019/07/31 |
CFF008-106002遠東集團 |
遠東集團工業4.0課程 |
2018/06/01~2019/07/31 |
CFF009-106003遠東集團 |
遠東集團工業4.0課程 |
2018/07/01~2019/07/31 |
NL070289中山科學研究院 |
|
2018/03/29~2018/12/10 |
計畫編號 |
計畫名稱 |
執行起迄 |
106-2622-E-155-001-CC2 |
創新鎂鋰合金材料的表面處理技術開發(2/2) |
2017/02/01~2018/04/30 |
106-2218-E-155-002 |
Roll-to-Roll製程智能生產-以顯示器偏光片生產為例(2/3) |
2017/10/01~2018/09/30 |
MOST106-2622-E-155-001-CC2安立材料 |
創新鎂鋰合金材料的表面處理技術開發(2/2) |
2017/02/01~2018/04/30 |
計畫編號 |
計畫名稱 |
執行起迄 |
105-2622-E-155-005-CC2 |
創新鎂鋰合金材料的表面處理技術開發(1/2) |
2016/02/01~2017/01/31 |
105-2622-E-155-011-CC2 |
印刷電路板鍍金製程之效率提升與金回收技術之研發 |
2016/06/01~2017/07/31 |
MOST105-2622-E-155-011-CC2臻鼎科技 |
印刷電路板鍍金製程之效率提升與金回收技術之研發 |
2016/06/01~2017/07/31 |
105-2218-E-155-012 |
Roll-to-Roll製程智能生產-以顯示器偏光片生產為例(1/3) |
2016/10/01~2017/09/30 |
MOST105-2622-E-155-005-CC2安立材料 |
創新鎂鋰合金材料的表面處理技術開發(1/2) |
2016/02/01~2017/01/31 |
計畫編號 |
計畫名稱 |
執行起迄 |
104-2221-E-155-055 |
PCB銅箔厚度電解減銅研究 |
2015/08/01~2016/07/31 |
計畫編號 |
計畫名稱 |
執行起迄 |
103-2622-E-155-002 |
電化學技術應用產學小聯盟(2/3) |
2014/02/01~2015/01/31 |
103-2221-E-155-023 |
電化學磷化塗層對碳鋼之研究 |
2014/08/01~2015/07/31 |
103-2622-E-155-007 -CC2 |
PCB銅箔表面電解粗化研究 |
2014/05/01~2015/07/31 |
MOST 103-2622-E-155-007-CC2-三輝 |
PCB銅箔表面電解粗化研究 |
2014/05/01~2015/04/30 |
MOST 103-2622-E-155-007-CC2-美麗基 |
PCB銅箔表面電解粗化研究 |
2014/05/01~2015/04/30 |
ME-103003 |
奈米功能性材料鍍膜及檢測 |
2014/11/10~2015/03/31 |
ME-103004 |
電化學去毛邊夾治具設計與模擬技術開發 |
2014/10/15~2015/05/31 |